[Qemu-ppc] [FIX PATCH v0] spapr: Allow configure-connector to be called multiple times for LMBs

[Bharata B Rao]

In case of in-kernel memory hot unplug, when the guest is not able
to remove all the LMBs that are requested for removal, it will add back
any LMBs that have been successfully removed. The DR Connectors of
these LMBs wouldn't have been unconfigured and hence the addition of
these LMBs will result in configure-connector call being issued on
LMB DR connectors that are already in configured state. Such
configure-connector calls will fail resulting in a DIMM which is
partially unplugged.

This however worked till recently before we overhauled the DRC
implementation in QEMU. Commit 9d4c0f4f0a71e: "spapr: Consolidate
DRC state variables" is the first commit where this problem shows up
as per git bisect.

Ideally guest shouldn't be issuing configure-connector call on an
already configured DR connector. However for now, work around this in
QEMU by allowing configure-connector to be called multiple times for
LMBs.

Signed-off-by: Bharata B Rao <address@hidden>
---
 hw/ppc/spapr_drc.c | 37 +++++++++++++++++++++++++++++++------
 1 file changed, 31 insertions(+), 6 deletions(-)

diff --git a/hw/ppc/spapr_drc.c b/hw/ppc/spapr_drc.c
index 5260b5d..2dd9635 100644
--- a/hw/ppc/spapr_drc.c
+++ b/hw/ppc/spapr_drc.c
@@ -446,8 +446,17 @@ void spapr_drc_reset(sPAPRDRConnector *drc)
         drc->state = drck->empty_state;
     }
 
-    drc->ccs_offset = -1;
-    drc->ccs_depth = -1;
+    if (spapr_drc_type(drc) == SPAPR_DR_CONNECTOR_TYPE_LMB) {
+        /*
+         * Ensure that we are able to send the FDT fragment of the
+         * LMB again via configure-connector call if guest requests.
+         */
+        drc->ccs_offset = drc->fdt_start_offset;
+        drc->ccs_depth = 0;
+    } else {
+        drc->ccs_offset = -1;
+        drc->ccs_depth = -1;
+    }
 }
 
 static void drc_reset(void *opaque)
@@ -1071,8 +1080,14 @@ static void rtas_ibm_configure_connector(PowerPCCPU *cpu,
     }
 
     if ((drc->state != SPAPR_DRC_STATE_LOGICAL_UNISOLATE)
-        && (drc->state != SPAPR_DRC_STATE_PHYSICAL_UNISOLATE)) {
-        /* Need to unisolate the device before configuring */
+        && (drc->state != SPAPR_DRC_STATE_PHYSICAL_UNISOLATE) &&
+        (spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_LMB)) {
+        /*
+         * Need to unisolate the device before configuring, however
+         * LMB DRCs are exempted from this check as guest can issue
+         * configure-connector calls for an already configured
+         * LMB DRC.
+         */
         rc = SPAPR_DR_CC_RESPONSE_NOT_CONFIGURABLE;
         goto out;
     }
@@ -1108,8 +1123,18 @@ static void rtas_ibm_configure_connector(PowerPCCPU *cpu,
                 /* done sending the device tree, move to configured state */
                 trace_spapr_drc_set_configured(drc_index);
                 drc->state = drck->ready_state;
-                drc->ccs_offset = -1;
-                drc->ccs_depth = -1;
+                if (spapr_drc_type(drc) == SPAPR_DR_CONNECTOR_TYPE_LMB) {
+                    /*
+                     * Ensure that we are able to send the FDT fragment of the
+                     * LMB again via configure-connector call if guest 
requests.
+                     */
+                    drc->ccs_offset = drc->fdt_start_offset;
+                    drc->ccs_depth = 0;
+                    fdt_offset_next = drc->fdt_start_offset;
+                } else {
+                    drc->ccs_offset = -1;
+                    drc->ccs_depth = -1;
+                }
                 resp = SPAPR_DR_CC_RESPONSE_SUCCESS;
             } else {
                 resp = SPAPR_DR_CC_RESPONSE_PREV_PARENT;
-- 
2.7.4