[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [PATCHv2] macio: convert pmac_ide_ops from old_mmio
From: |
David Gibson |
Subject: |
Re: [Qemu-ppc] [PATCHv2] macio: convert pmac_ide_ops from old_mmio |
Date: |
Wed, 20 Sep 2017 14:29:07 +1000 |
User-agent: |
Mutt/1.8.3 (2017-05-23) |
On Tue, Sep 19, 2017 at 09:02:54PM +0100, Mark Cave-Ayland wrote:
> Signed-off-by: Mark Cave-Ayland <address@hidden>
This didn't apply for me. Can you rebase on top of ppc-for-2.11, please.
> ---
> hw/ide/macio.c | 181
> +++++++++++++++++++++++---------------------------------
> 1 file changed, 75 insertions(+), 106 deletions(-)
>
> diff --git a/hw/ide/macio.c b/hw/ide/macio.c
> index db5db39..18ae952 100644
> --- a/hw/ide/macio.c
> +++ b/hw/ide/macio.c
> @@ -255,131 +255,100 @@ static void pmac_ide_flush(DBDMA_io *io)
> }
>
> /* PowerMac IDE memory IO */
> -static void pmac_ide_writeb (void *opaque,
> - hwaddr addr, uint32_t val)
> +static uint64_t pmac_ide_read(void *opaque, hwaddr addr, unsigned size)
> {
> MACIOIDEState *d = opaque;
> -
> - addr = (addr & 0xFFF) >> 4;
> - switch (addr) {
> - case 1 ... 7:
> - ide_ioport_write(&d->bus, addr, val);
> - break;
> - case 8:
> - case 22:
> - ide_cmd_write(&d->bus, 0, val);
> + uint64_t retval = 0xffffffff;
> + int reg = addr >> 4;
> +
> + switch (reg) {
> + case 0x0:
> + if (size == 2) {
> + retval = ide_data_readw(&d->bus, 0);
> + } else if (size == 4) {
> + retval = ide_data_readl(&d->bus, 0);
> + }
> break;
> - default:
> + case 0x1 ... 0x7:
> + if (size == 1) {
> + retval = ide_ioport_read(&d->bus, reg);
> + }
> break;
> - }
> -}
> -
> -static uint32_t pmac_ide_readb (void *opaque,hwaddr addr)
> -{
> - uint8_t retval;
> - MACIOIDEState *d = opaque;
> -
> - addr = (addr & 0xFFF) >> 4;
> - switch (addr) {
> - case 1 ... 7:
> - retval = ide_ioport_read(&d->bus, addr);
> + case 0x8:
> + case 0x16:
> + if (size == 1) {
> + retval = ide_status_read(&d->bus, 0);
> + }
> break;
> - case 8:
> - case 22:
> - retval = ide_status_read(&d->bus, 0);
> + case 0x20:
> + if (size == 4) {
> + retval = d->timing_reg;
> + }
> break;
> - default:
> - retval = 0xFF;
> + case 0x30:
> + /* This is an interrupt state register that only exists
> + * in the KeyLargo and later variants. Bit 0x8000_0000
> + * latches the DMA interrupt and has to be written to
> + * clear. Bit 0x4000_0000 is an image of the disk
> + * interrupt. MacOS X relies on this and will hang if
> + * we don't provide at least the disk interrupt
> + */
> + if (size == 4) {
> + retval = d->irq_reg;
> + }
> break;
> }
> - return retval;
> -}
>
> -static void pmac_ide_writew (void *opaque,
> - hwaddr addr, uint32_t val)
> -{
> - MACIOIDEState *d = opaque;
> -
> - addr = (addr & 0xFFF) >> 4;
> - val = bswap16(val);
> - if (addr == 0) {
> - ide_data_writew(&d->bus, 0, val);
> - }
> -}
> -
> -static uint32_t pmac_ide_readw (void *opaque,hwaddr addr)
> -{
> - uint16_t retval;
> - MACIOIDEState *d = opaque;
> -
> - addr = (addr & 0xFFF) >> 4;
> - if (addr == 0) {
> - retval = ide_data_readw(&d->bus, 0);
> - } else {
> - retval = 0xFFFF;
> - }
> - retval = bswap16(retval);
> return retval;
> }
>
> -static void pmac_ide_writel (void *opaque,
> - hwaddr addr, uint32_t val)
> -{
> - MACIOIDEState *d = opaque;
>
> - addr = (addr & 0xFFF) >> 4;
> - val = bswap32(val);
> - if (addr == 0) {
> - ide_data_writel(&d->bus, 0, val);
> - } else if (addr == 0x20) {
> - d->timing_reg = val;
> - } else if (addr == 0x30) {
> - if (val & 0x80000000u) {
> - d->irq_reg &= 0x7fffffff;
> - }
> - }
> -}
> -
> -static uint32_t pmac_ide_readl (void *opaque,hwaddr addr)
> +static void pmac_ide_write(void *opaque, hwaddr addr, uint64_t val,
> + unsigned size)
> {
> - uint32_t retval;
> MACIOIDEState *d = opaque;
> -
> - addr = (addr & 0xFFF) >> 4;
> - if (addr == 0) {
> - retval = ide_data_readl(&d->bus, 0);
> - } else if (addr == 0x20) {
> - retval = d->timing_reg;
> - } else if (addr == 0x30) {
> - /* This is an interrupt state register that only exists
> - * in the KeyLargo and later variants. Bit 0x8000_0000
> - * latches the DMA interrupt and has to be written to
> - * clear. Bit 0x4000_0000 is an image of the disk
> - * interrupt. MacOS X relies on this and will hang if
> - * we don't provide at least the disk interrupt
> - */
> - retval = d->irq_reg;
> - } else {
> - retval = 0xFFFFFFFF;
> + int reg = addr >> 4;
> +
> + switch (reg) {
> + case 0x0:
> + if (size == 2) {
> + ide_data_writew(&d->bus, 0, val);
> + } else if (size == 4) {
> + ide_data_writel(&d->bus, 0, val);
> + }
> + break;
> + case 0x1 ... 0x7:
> + if (size == 1) {
> + ide_ioport_write(&d->bus, reg, val);
> + }
> + break;
> + case 0x8:
> + case 0x16:
> + if (size == 1) {
> + ide_cmd_write(&d->bus, 0, val);
> + }
> + break;
> + case 0x20:
> + if (size == 4) {
> + d->timing_reg = val;
> + }
> + break;
> + case 0x30:
> + if (size == 4) {
> + if (val & 0x80000000u) {
> + d->irq_reg &= 0x7fffffff;
> + }
> + }
> + break;
> }
> - retval = bswap32(retval);
> - return retval;
> }
>
> static const MemoryRegionOps pmac_ide_ops = {
> - .old_mmio = {
> - .write = {
> - pmac_ide_writeb,
> - pmac_ide_writew,
> - pmac_ide_writel,
> - },
> - .read = {
> - pmac_ide_readb,
> - pmac_ide_readw,
> - pmac_ide_readl,
> - },
> - },
> - .endianness = DEVICE_NATIVE_ENDIAN,
> + .read = pmac_ide_read,
> + .write = pmac_ide_write,
> + .valid.min_access_size = 1,
> + .valid.max_access_size = 4,
> + .endianness = DEVICE_LITTLE_ENDIAN,
> };
>
> static const VMStateDescription vmstate_pmac = {
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature