[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-ppc] [PULL 08/17] spapr: Clean up LPCR updates from hypercalls
From: |
David Gibson |
Subject: |
[Qemu-ppc] [PULL 08/17] spapr: Clean up LPCR updates from hypercalls |
Date: |
Fri, 4 May 2018 15:59:21 +1000 |
There are several places in spapr_hcall.c where we need to update the LPCR
value on all CPUs. We do this with the set_spr() helper. That's not
really correct because this directly sets the SPR value, without going
through the ppc_store_lpcr() helper which may need to update state based
on the LPCR change.
In fact, set_spr() is only ever used for the LPCR, so replace it with an
explicit LPCR updated which uses the right low-level helper. While we're
there, move the CPU_FOREACH() which was in every one of the callers into
the new helper: set_all_lpcrs().
Signed-off-by: David Gibson <address@hidden>
Reviewed-by: Cédric Le Goater <address@hidden>
Tested-by: Cédric Le Goater <address@hidden>
---
hw/ppc/spapr_hcall.c | 50 ++++++++++++++++++--------------------------
1 file changed, 20 insertions(+), 30 deletions(-)
diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
index 16bccdd5c0..ca9702e667 100644
--- a/hw/ppc/spapr_hcall.c
+++ b/hw/ppc/spapr_hcall.c
@@ -15,32 +15,35 @@
#include "hw/ppc/spapr_ovec.h"
#include "mmu-book3s-v3.h"
-struct SPRSyncState {
- int spr;
+struct LPCRSyncState {
target_ulong value;
target_ulong mask;
};
-static void do_spr_sync(CPUState *cs, run_on_cpu_data arg)
+static void do_lpcr_sync(CPUState *cs, run_on_cpu_data arg)
{
- struct SPRSyncState *s = arg.host_ptr;
+ struct LPCRSyncState *s = arg.host_ptr;
PowerPCCPU *cpu = POWERPC_CPU(cs);
CPUPPCState *env = &cpu->env;
+ target_ulong lpcr;
cpu_synchronize_state(cs);
- env->spr[s->spr] &= ~s->mask;
- env->spr[s->spr] |= s->value;
+ lpcr = env->spr[SPR_LPCR];
+ lpcr &= ~s->mask;
+ lpcr |= s->value;
+ ppc_store_lpcr(cpu, lpcr);
}
-static void set_spr(CPUState *cs, int spr, target_ulong value,
- target_ulong mask)
+static void set_all_lpcrs(target_ulong value, target_ulong mask)
{
- struct SPRSyncState s = {
- .spr = spr,
+ CPUState *cs;
+ struct LPCRSyncState s = {
.value = value,
.mask = mask
};
- run_on_cpu(cs, do_spr_sync, RUN_ON_CPU_HOST_PTR(&s));
+ CPU_FOREACH(cs) {
+ run_on_cpu(cs, do_lpcr_sync, RUN_ON_CPU_HOST_PTR(&s));
+ }
}
static bool has_spr(PowerPCCPU *cpu, int spr)
@@ -1235,8 +1238,6 @@ static target_ulong h_set_mode_resource_le(PowerPCCPU
*cpu,
target_ulong value1,
target_ulong value2)
{
- CPUState *cs;
-
if (value1) {
return H_P3;
}
@@ -1246,16 +1247,12 @@ static target_ulong h_set_mode_resource_le(PowerPCCPU
*cpu,
switch (mflags) {
case H_SET_MODE_ENDIAN_BIG:
- CPU_FOREACH(cs) {
- set_spr(cs, SPR_LPCR, 0, LPCR_ILE);
- }
+ set_all_lpcrs(0, LPCR_ILE);
spapr_pci_switch_vga(true);
return H_SUCCESS;
case H_SET_MODE_ENDIAN_LITTLE:
- CPU_FOREACH(cs) {
- set_spr(cs, SPR_LPCR, LPCR_ILE, LPCR_ILE);
- }
+ set_all_lpcrs(LPCR_ILE, LPCR_ILE);
spapr_pci_switch_vga(false);
return H_SUCCESS;
}
@@ -1268,7 +1265,6 @@ static target_ulong
h_set_mode_resource_addr_trans_mode(PowerPCCPU *cpu,
target_ulong value1,
target_ulong value2)
{
- CPUState *cs;
PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cpu);
if (!(pcc->insns_flags2 & PPC2_ISA207S)) {
@@ -1285,9 +1281,7 @@ static target_ulong
h_set_mode_resource_addr_trans_mode(PowerPCCPU *cpu,
return H_UNSUPPORTED_FLAG;
}
- CPU_FOREACH(cs) {
- set_spr(cs, SPR_LPCR, mflags << LPCR_AIL_SHIFT, LPCR_AIL);
- }
+ set_all_lpcrs(mflags << LPCR_AIL_SHIFT, LPCR_AIL);
return H_SUCCESS;
}
@@ -1364,7 +1358,6 @@ static target_ulong h_register_process_table(PowerPCCPU
*cpu,
target_ulong opcode,
target_ulong *args)
{
- CPUState *cs;
target_ulong flags = args[0];
target_ulong proc_tbl = args[1];
target_ulong page_size = args[2];
@@ -1422,12 +1415,9 @@ static target_ulong h_register_process_table(PowerPCCPU
*cpu,
spapr->patb_entry = cproc; /* Save new process table */
/* Update the UPRT and GTSE bits in the LPCR for all cpus */
- CPU_FOREACH(cs) {
- set_spr(cs, SPR_LPCR,
- ((flags & (FLAG_RADIX | FLAG_HASH_PROC_TBL)) ? LPCR_UPRT : 0) |
- ((flags & FLAG_GTSE) ? LPCR_GTSE : 0),
- LPCR_UPRT | LPCR_GTSE);
- }
+ set_all_lpcrs(((flags & (FLAG_RADIX | FLAG_HASH_PROC_TBL)) ? LPCR_UPRT :
0) |
+ ((flags & FLAG_GTSE) ? LPCR_GTSE : 0),
+ LPCR_UPRT | LPCR_GTSE);
if (kvm_enabled()) {
return kvmppc_configure_v3_mmu(cpu, flags & FLAG_RADIX,
--
2.17.0
- [Qemu-ppc] [PULL 15/17] target/ppc: always set PPC_MEM_TLBIE in pre 2.8 migration hack, (continued)
- [Qemu-ppc] [PULL 15/17] target/ppc: always set PPC_MEM_TLBIE in pre 2.8 migration hack, David Gibson, 2018/05/04
- [Qemu-ppc] [PULL 16/17] spapr: don't migrate "spapr_option_vector_ov5_cas" to pre 2.8 machines, David Gibson, 2018/05/04
- [Qemu-ppc] [PULL 04/17] target/ppc: Add ppc_store_lpcr() helper, David Gibson, 2018/05/04
- [Qemu-ppc] [PULL 17/17] spapr: don't advertise radix GTSE if max-compat-cpu < power9, David Gibson, 2018/05/04
- [Qemu-ppc] [PULL 14/17] mac_newworld: move wiring of macio IRQs to macio_newworld_realize(), David Gibson, 2018/05/04
- [Qemu-ppc] [PULL 10/17] spapr: Move PAPR mode cpu setup fully to spapr code, David Gibson, 2018/05/04
- [Qemu-ppc] [PULL 12/17] uninorth: create new uninorth device, David Gibson, 2018/05/04
- [Qemu-ppc] [PULL 09/17] target/ppc: Delay initialization of LPCR_UPRT for secondary cpus, David Gibson, 2018/05/04
- [Qemu-ppc] [PULL 06/17] spapr: Remove unhelpful helpers from rtas_start_cpu(), David Gibson, 2018/05/04
- [Qemu-ppc] [PULL 13/17] mac_newworld: remove pics IRQ array and wire up macio to OpenPIC directly, David Gibson, 2018/05/04
- [Qemu-ppc] [PULL 08/17] spapr: Clean up LPCR updates from hypercalls,
David Gibson <=
- Re: [Qemu-ppc] [PULL 00/17] ppc-for-2.13 queue 20180504, Peter Maydell, 2018/05/04