[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 51/60] hw/i2c: pmbus: add fan support
|
From: |
Philippe Mathieu-Daudé |
|
Subject: |
[PULL 51/60] hw/i2c: pmbus: add fan support |
|
Date: |
Mon, 6 Nov 2023 12:03:23 +0100 |
From: Titus Rwantare <titusr@google.com>
PMBus devices may integrate fans whose operation is configurable
over PMBus. This commit allows the driver to read and write the
fan control registers but does not model the operation of fans.
Reviewed-by: Stephen Longfield <slongfield@google.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
Message-ID: <20231023-staging-pmbus-v3-v4-3-07a8cb7cd20a@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
include/hw/i2c/pmbus_device.h | 1 +
hw/i2c/pmbus_device.c | 176 ++++++++++++++++++++++++++++++++++
2 files changed, 177 insertions(+)
diff --git a/include/hw/i2c/pmbus_device.h b/include/hw/i2c/pmbus_device.h
index 2e95164aa1..ad431bdc7c 100644
--- a/include/hw/i2c/pmbus_device.h
+++ b/include/hw/i2c/pmbus_device.h
@@ -258,6 +258,7 @@ OBJECT_DECLARE_TYPE(PMBusDevice, PMBusDeviceClass,
#define PB_HAS_TEMP2 BIT_ULL(41)
#define PB_HAS_TEMP3 BIT_ULL(42)
#define PB_HAS_TEMP_RATING BIT_ULL(43)
+#define PB_HAS_FAN BIT_ULL(44)
#define PB_HAS_MFR_INFO BIT_ULL(50)
#define PB_HAS_STATUS_MFR_SPECIFIC BIT_ULL(51)
diff --git a/hw/i2c/pmbus_device.c b/hw/i2c/pmbus_device.c
index ea15490720..c1d8c93056 100644
--- a/hw/i2c/pmbus_device.c
+++ b/hw/i2c/pmbus_device.c
@@ -500,6 +500,54 @@ static uint8_t pmbus_receive_byte(SMBusDevice *smd)
}
break;
+ case PMBUS_FAN_CONFIG_1_2: /* R/W byte */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send8(pmdev, pmdev->pages[index].fan_config_1_2);
+ } else {
+ goto passthough;
+ }
+ break;
+
+ case PMBUS_FAN_COMMAND_1: /* R/W word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send16(pmdev, pmdev->pages[index].fan_command_1);
+ } else {
+ goto passthough;
+ }
+ break;
+
+ case PMBUS_FAN_COMMAND_2: /* R/W word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send16(pmdev, pmdev->pages[index].fan_command_2);
+ } else {
+ goto passthough;
+ }
+ break;
+
+ case PMBUS_FAN_CONFIG_3_4: /* R/W byte */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send8(pmdev, pmdev->pages[index].fan_config_3_4);
+ } else {
+ goto passthough;
+ }
+ break;
+
+ case PMBUS_FAN_COMMAND_3: /* R/W word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send16(pmdev, pmdev->pages[index].fan_command_3);
+ } else {
+ goto passthough;
+ }
+ break;
+
+ case PMBUS_FAN_COMMAND_4: /* R/W word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send16(pmdev, pmdev->pages[index].fan_command_4);
+ } else {
+ goto passthough;
+ }
+ break;
+
case PMBUS_VOUT_OV_FAULT_LIMIT: /* R/W word */
if (pmdev->pages[index].page_flags & PB_HAS_VOUT) {
pmbus_send16(pmdev, pmdev->pages[index].vout_ov_fault_limit);
@@ -810,6 +858,22 @@ static uint8_t pmbus_receive_byte(SMBusDevice *smd)
pmbus_send8(pmdev, pmdev->pages[index].status_mfr_specific);
break;
+ case PMBUS_STATUS_FANS_1_2: /* R/W byte */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send8(pmdev, pmdev->pages[index].status_fans_1_2);
+ } else {
+ goto passthough;
+ }
+ break;
+
+ case PMBUS_STATUS_FANS_3_4: /* R/W byte */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send8(pmdev, pmdev->pages[index].status_fans_3_4);
+ } else {
+ goto passthough;
+ }
+ break;
+
case PMBUS_READ_EIN: /* Read-Only block 5 bytes */
if (pmdev->pages[index].page_flags & PB_HAS_EIN) {
pmbus_send(pmdev, pmdev->pages[index].read_ein, 5);
@@ -882,6 +946,54 @@ static uint8_t pmbus_receive_byte(SMBusDevice *smd)
}
break;
+ case PMBUS_READ_FAN_SPEED_1: /* Read-Only word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send16(pmdev, pmdev->pages[index].read_fan_speed_1);
+ } else {
+ goto passthough;
+ }
+ break;
+
+ case PMBUS_READ_FAN_SPEED_2: /* Read-Only word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send16(pmdev, pmdev->pages[index].read_fan_speed_2);
+ } else {
+ goto passthough;
+ }
+ break;
+
+ case PMBUS_READ_FAN_SPEED_3: /* Read-Only word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send16(pmdev, pmdev->pages[index].read_fan_speed_3);
+ } else {
+ goto passthough;
+ }
+ break;
+
+ case PMBUS_READ_FAN_SPEED_4: /* Read-Only word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send16(pmdev, pmdev->pages[index].read_fan_speed_4);
+ } else {
+ goto passthough;
+ }
+ break;
+
+ case PMBUS_READ_DUTY_CYCLE: /* Read-Only word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send16(pmdev, pmdev->pages[index].read_duty_cycle);
+ } else {
+ goto passthough;
+ }
+ break;
+
+ case PMBUS_READ_FREQUENCY: /* Read-Only word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send16(pmdev, pmdev->pages[index].read_frequency);
+ } else {
+ goto passthough;
+ }
+ break;
+
case PMBUS_READ_POUT: /* Read-Only word */
if (pmdev->pages[index].page_flags & PB_HAS_POUT) {
pmbus_send16(pmdev, pmdev->pages[index].read_pout);
@@ -1305,6 +1417,54 @@ static int pmbus_write_data(SMBusDevice *smd, uint8_t
*buf, uint8_t len)
}
break;
+ case PMBUS_FAN_CONFIG_1_2: /* R/W byte */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmdev->pages[index].fan_config_1_2 = pmbus_receive8(pmdev);
+ } else {
+ goto passthrough;
+ }
+ break;
+
+ case PMBUS_FAN_COMMAND_1: /* R/W word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmdev->pages[index].fan_command_1 = pmbus_receive16(pmdev);
+ } else {
+ goto passthrough;
+ }
+ break;
+
+ case PMBUS_FAN_COMMAND_2: /* R/W word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmdev->pages[index].fan_command_2 = pmbus_receive16(pmdev);
+ } else {
+ goto passthrough;
+ }
+ break;
+
+ case PMBUS_FAN_CONFIG_3_4: /* R/W byte */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmdev->pages[index].fan_config_3_4 = pmbus_receive8(pmdev);
+ } else {
+ goto passthrough;
+ }
+ break;
+
+ case PMBUS_FAN_COMMAND_3: /* R/W word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmdev->pages[index].fan_command_3 = pmbus_receive16(pmdev);
+ } else {
+ goto passthrough;
+ }
+ break;
+
+ case PMBUS_FAN_COMMAND_4: /* R/W word */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmdev->pages[index].fan_command_4 = pmbus_receive16(pmdev);
+ } else {
+ goto passthrough;
+ }
+ break;
+
case PMBUS_VOUT_OV_FAULT_LIMIT: /* R/W word */
if (pmdev->pages[index].page_flags & PB_HAS_VOUT) {
pmdev->pages[index].vout_ov_fault_limit = pmbus_receive16(pmdev);
@@ -1610,6 +1770,22 @@ static int pmbus_write_data(SMBusDevice *smd, uint8_t
*buf, uint8_t len)
pmdev->pages[index].status_mfr_specific = pmbus_receive8(pmdev);
break;
+ case PMBUS_STATUS_FANS_1_2: /* R/W byte */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send8(pmdev, pmdev->pages[index].status_fans_1_2);
+ } else {
+ goto passthrough;
+ }
+ break;
+
+ case PMBUS_STATUS_FANS_3_4: /* R/W byte */
+ if (pmdev->pages[index].page_flags & PB_HAS_FAN) {
+ pmbus_send8(pmdev, pmdev->pages[index].status_fans_3_4);
+ } else {
+ goto passthrough;
+ }
+ break;
+
case PMBUS_PAGE_PLUS_READ: /* Block Read-only */
case PMBUS_CAPABILITY: /* Read-Only byte */
case PMBUS_COEFFICIENTS: /* Read-only block 5 bytes */
--
2.41.0
- [PULL 41/60] hw/loader: Clean up global variable shadowing in rom_add_file(), (continued)
- [PULL 41/60] hw/loader: Clean up global variable shadowing in rom_add_file(), Philippe Mathieu-Daudé, 2023/11/06
- [PULL 42/60] hw/isa/i82378: Propagate error if PC_SPEAKER device creation failed, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 43/60] hw/i386: Fix comment style in topology.h, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 44/60] tests/unit: Rename test-x86-cpuid.c to test-x86-topo.c, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 45/60] system/cpus: Fix CPUState.nr_cores' calculation, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 46/60] hw/cpu: Update the comments of nr_cores and nr_dies, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 47/60] hw/ide: reset: cancel async DMA operation before resetting state, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 49/60] hw/i2c: pmbus add support for block receive, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 48/60] tests/qtest: ahci-test: add test exposing reset issue with pending callback, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 50/60] hw/i2c: pmbus: add vout mode bitfields, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 51/60] hw/i2c: pmbus: add fan support,
Philippe Mathieu-Daudé <=
- [PULL 52/60] hw/i2c: pmbus: add VCAP register, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 53/60] hw/sensor: add ADM1266 device model, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 54/60] tests/qtest: add tests for ADM1266, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 55/60] hw/i2c: pmbus: immediately clear faults on request, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 58/60] MAINTAINERS: Add the CAN documentation file to the CAN section, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 56/60] hw/i2c: pmbus: reset page register for out of range reads, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 60/60] ui/sdl2: use correct key names in win title on mac, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 57/60] MAINTAINERS: Add include/hw/timer/tmu012.h to the SH4 R2D section, Philippe Mathieu-Daudé, 2023/11/06
- [PULL 59/60] MAINTAINERS: update libvirt devel mailing list address, Philippe Mathieu-Daudé, 2023/11/06
- Re: [PULL 00/60] Misc HW/UI patches for 2023-11-06, Stefan Hajnoczi, 2023/11/06