[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 12/18] pc-bios/s390-ccw: Enable failed IPL to return after error
|
From: |
jrossi |
|
Subject: |
[PATCH 12/18] pc-bios/s390-ccw: Enable failed IPL to return after error |
|
Date: |
Thu, 26 Sep 2024 20:51:11 -0400 |
From: Jared Rossi <jrossi@linux.ibm.com>
Remove panic-on-error from IPL functions such that a return code is propagated
back to the main IPL calling function (rather than terminating immediately),
which facilitates possible error recovery in the future.
A select few panics remain, which indicate fatal non-devices errors that must
result in termination.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
---
pc-bios/s390-ccw/s390-ccw.h | 2 +-
pc-bios/s390-ccw/virtio.h | 2 +-
pc-bios/s390-ccw/bootmap.c | 53 ++++++++++++++++++--------
pc-bios/s390-ccw/cio.c | 3 +-
pc-bios/s390-ccw/jump2ipl.c | 5 ++-
pc-bios/s390-ccw/main.c | 35 +++++++++--------
pc-bios/s390-ccw/virtio-blkdev.c | 8 ++--
pc-bios/s390-ccw/virtio.c | 65 +++++++++++++++++++++-----------
8 files changed, 113 insertions(+), 60 deletions(-)
diff --git a/pc-bios/s390-ccw/s390-ccw.h b/pc-bios/s390-ccw/s390-ccw.h
index 8dac070257..7e49da46a5 100644
--- a/pc-bios/s390-ccw/s390-ccw.h
+++ b/pc-bios/s390-ccw/s390-ccw.h
@@ -78,7 +78,7 @@ void zipl_load(void);
/* jump2ipl.c */
void write_reset_psw(uint64_t psw);
-void jump_to_IPL_code(uint64_t address);
+int jump_to_IPL_code(uint64_t address);
void jump_to_low_kernel(void);
/* menu.c */
diff --git a/pc-bios/s390-ccw/virtio.h b/pc-bios/s390-ccw/virtio.h
index 6f9a558ff5..9faf3986b1 100644
--- a/pc-bios/s390-ccw/virtio.h
+++ b/pc-bios/s390-ccw/virtio.h
@@ -274,7 +274,7 @@ void vring_send_buf(VRing *vr, void *p, int len, int flags);
int vr_poll(VRing *vr);
int vring_wait_reply(void);
int virtio_run(VDev *vdev, int vqid, VirtioCmd *cmd);
-void virtio_setup_ccw(VDev *vdev);
+int virtio_setup_ccw(VDev *vdev);
int virtio_net_init(void *mac_addr);
diff --git a/pc-bios/s390-ccw/bootmap.c b/pc-bios/s390-ccw/bootmap.c
index 9459e19ffb..6e1f47821e 100644
--- a/pc-bios/s390-ccw/bootmap.c
+++ b/pc-bios/s390-ccw/bootmap.c
@@ -62,15 +62,34 @@ static void *s2_prev_blk = _s2;
static void *s2_cur_blk = _s2 + MAX_SECTOR_SIZE;
static void *s2_next_blk = _s2 + MAX_SECTOR_SIZE * 2;
-static inline void verify_boot_info(BootInfo *bip)
+static inline int verify_boot_info(BootInfo *bip)
{
- IPL_assert(magic_match(bip->magic, ZIPL_MAGIC), "No zIPL sig in BootInfo");
- IPL_assert(bip->version == BOOT_INFO_VERSION, "Wrong zIPL version");
- IPL_assert(bip->bp_type == BOOT_INFO_BP_TYPE_IPL, "DASD is not for IPL");
- IPL_assert(bip->dev_type == BOOT_INFO_DEV_TYPE_ECKD, "DASD is not ECKD");
- IPL_assert(bip->flags == BOOT_INFO_FLAGS_ARCH, "Not for this arch");
- IPL_assert(block_size_ok(bip->bp.ipl.bm_ptr.eckd.bptr.size),
- "Bad block size in zIPL section of the 1st record.");
+ if (!magic_match(bip->magic, ZIPL_MAGIC)) {
+ puts("No zIPL sig in BootInfo");
+ return -EINVAL;
+ }
+ if (bip->version != BOOT_INFO_VERSION) {
+ puts("Wrong zIPL version");
+ return -EINVAL;
+ }
+ if (bip->bp_type != BOOT_INFO_BP_TYPE_IPL) {
+ puts("DASD is not for IPL");
+ return -ENODEV;
+ }
+ if (bip->dev_type != BOOT_INFO_DEV_TYPE_ECKD) {
+ puts("DASD is not ECKD");
+ return -ENODEV;
+ }
+ if (bip->flags != BOOT_INFO_FLAGS_ARCH) {
+ puts("Not for this arch");
+ return -EINVAL;
+ }
+ if (!block_size_ok(bip->bp.ipl.bm_ptr.eckd.bptr.size)) {
+ puts("Bad block size in zIPL section of 1st record");
+ return -EINVAL;
+ }
+
+ return 0;
}
static void eckd_format_chs(ExtEckdBlockPtr *ptr, bool ldipl,
@@ -368,8 +387,8 @@ static int run_eckd_boot_script(block_number_t bmt_block_nr,
puts("Unknown script entry type");
return -EINVAL;
}
- write_reset_psw(bms->entry[i].address.load_address); /* no return */
- jump_to_IPL_code(0); /* no return */
+ write_reset_psw(bms->entry[i].address.load_address);
+ jump_to_IPL_code(0);
return 1;
}
@@ -1054,16 +1073,19 @@ void zipl_load(void)
if (vdev->is_cdrom) {
ipl_iso_el_torito();
- panic("\n! Cannot IPL this ISO image !\n");
+ puts("Failed to IPL this ISO image!");
+ return;
}
if (virtio_get_device_type() == VIRTIO_ID_NET) {
netmain();
- panic("\n! Cannot IPL from this network !\n");
+ puts("Failed to IPL from this network!");
+ return;
}
if (ipl_scsi()) {
- panic("\n! Cannot IPL this device !\n");
+ puts("Failed to IPL from this device!");
+ return;
}
switch (virtio_get_device_type()) {
@@ -1074,8 +1096,9 @@ void zipl_load(void)
zipl_load_vscsi();
break;
default:
- panic("\n! Unknown IPL device type !\n");
+ puts("Unknown IPL device type!");
+ return;
}
- puts("zIPL load failed.");
+ puts("zIPL load failed!");
}
diff --git a/pc-bios/s390-ccw/cio.c b/pc-bios/s390-ccw/cio.c
index 758e74965e..35b08ba7c1 100644
--- a/pc-bios/s390-ccw/cio.c
+++ b/pc-bios/s390-ccw/cio.c
@@ -59,7 +59,8 @@ uint16_t cu_type(SubChannelId schid)
};
if (do_cio(schid, CU_TYPE_UNKNOWN, ptr2u32(&sense_id_ccw), CCW_FMT1)) {
- panic("Failed to run SenseID CCw\n");
+ puts("Failed to run SenseID CCW");
+ return CU_TYPE_UNKNOWN;
}
return sense_data.cu_type;
diff --git a/pc-bios/s390-ccw/jump2ipl.c b/pc-bios/s390-ccw/jump2ipl.c
index 80b7f6a1f3..d45aec6694 100644
--- a/pc-bios/s390-ccw/jump2ipl.c
+++ b/pc-bios/s390-ccw/jump2ipl.c
@@ -33,7 +33,7 @@ static void jump_to_IPL_addr(void)
/* should not return */
}
-void jump_to_IPL_code(uint64_t address)
+int jump_to_IPL_code(uint64_t address)
{
/* store the subsystem information _after_ the bootmap was loaded */
write_subsystem_identification();
@@ -68,7 +68,8 @@ void jump_to_IPL_code(uint64_t address)
asm volatile("lghi %%r1,1\n\t"
"diag %%r1,%%r1,0x308\n\t"
: : : "1", "memory");
- panic("\n! IPL returns !\n");
+ puts("IPL code jump failed");
+ return 1;
}
void jump_to_low_kernel(void)
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index 2345432abb..f818bd7210 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -77,6 +77,9 @@ static int is_dev_possibly_bootable(int dev_no, int sch_no)
enable_subchannel(blk_schid);
cutype = cu_type(blk_schid);
+ if (cutype == CU_TYPE_UNKNOWN) {
+ return -EIO;
+ }
/*
* Note: we always have to run virtio_is_supported() here to make
@@ -194,10 +197,10 @@ static void boot_setup(void)
have_iplb = store_iplb(&iplb);
}
-static void find_boot_device(void)
+static bool find_boot_device(void)
{
VDev *vdev = virtio_get_device();
- bool found;
+ bool found = false;
switch (iplb.pbt) {
case S390_IPL_TYPE_CCW:
@@ -215,10 +218,10 @@ static void find_boot_device(void)
found = find_subch(iplb.scsi.devno);
break;
default:
- panic("List-directed IPL not supported yet!\n");
+ puts("Invalid IPLB");
}
- IPL_assert(found, "Boot device not found\n");
+ return found;
}
static int virtio_setup(void)
@@ -244,11 +247,13 @@ static int virtio_setup(void)
ret = virtio_scsi_setup_device(blk_schid);
break;
default:
- panic("\n! No IPL device available !\n");
+ puts("\n! No IPL device available !\n");
+ return 1;
}
- if (!ret) {
- IPL_assert(virtio_ipl_disk_is_valid(), "No valid IPL device detected");
+ if (!ret && !virtio_ipl_disk_is_valid()) {
+ puts("No valid IPL device detected");
+ return -ENODEV;
}
return ret;
@@ -259,16 +264,16 @@ static void ipl_boot_device(void)
switch (cutype) {
case CU_TYPE_DASD_3990:
case CU_TYPE_DASD_2107:
- dasd_ipl(blk_schid, cutype); /* no return */
+ dasd_ipl(blk_schid, cutype);
break;
case CU_TYPE_VIRTIO:
- if (virtio_setup() == 0) {
- zipl_load(); /* Only returns in case of errors */
+ if (virtio_setup()) {
+ return; /* Only returns in case of errors */
}
+ zipl_load();
break;
default:
printf("Attempting to boot from unexpected device type 0x%X", cutype);
- panic("\nBoot failed.\n");
}
}
@@ -288,7 +293,8 @@ static void probe_boot_device(void)
break;
}
if (ret == true) {
- ipl_boot_device(); /* Only returns if unsuccessful */
+ ipl_boot_device(); /* Only returns if unsuccessful */
+ return;
}
}
}
@@ -301,12 +307,11 @@ void main(void)
sclp_setup();
css_setup();
boot_setup();
- if (have_iplb) {
- find_boot_device();
+ if (have_iplb && find_boot_device()) {
ipl_boot_device();
} else {
probe_boot_device();
}
- panic("Failed to load OS from hard disk\n");
+ panic("Failed to IPL. Halting...");
}
diff --git a/pc-bios/s390-ccw/virtio-blkdev.c b/pc-bios/s390-ccw/virtio-blkdev.c
index 2666326801..5ef273bdc0 100644
--- a/pc-bios/s390-ccw/virtio-blkdev.c
+++ b/pc-bios/s390-ccw/virtio-blkdev.c
@@ -59,8 +59,8 @@ int virtio_read_many(unsigned long sector, void *load_addr,
int sec_num)
case VIRTIO_ID_SCSI:
return virtio_scsi_read_many(vdev, sector, load_addr, sec_num);
}
- panic("\n! No readable IPL device !\n");
- return -1;
+
+ return 1;
}
unsigned long virtio_load_direct(unsigned long rec_list1, unsigned long
rec_list2,
@@ -73,13 +73,13 @@ unsigned long virtio_load_direct(unsigned long rec_list1,
unsigned long rec_list
unsigned long addr = (unsigned long)load_addr;
if (sec_len != virtio_get_block_size()) {
- return -1;
+ return 0;
}
printf(".");
status = virtio_read_many(sec, (void *)addr, sec_num);
if (status) {
- panic("I/O Error");
+ return 0;
}
addr += sec_num * virtio_get_block_size();
diff --git a/pc-bios/s390-ccw/virtio.c b/pc-bios/s390-ccw/virtio.c
index 8c6b0a8a92..e3fdb95b3c 100644
--- a/pc-bios/s390-ccw/virtio.c
+++ b/pc-bios/s390-ccw/virtio.c
@@ -217,16 +217,19 @@ int virtio_run(VDev *vdev, int vqid, VirtioCmd *cmd)
return 0;
}
-void virtio_setup_ccw(VDev *vdev)
+int virtio_setup_ccw(VDev *vdev)
{
- int i, rc, cfg_size = 0;
+ int i, cfg_size = 0;
uint8_t status;
struct VirtioFeatureDesc {
uint32_t features;
uint8_t index;
} __attribute__((packed)) feats;
- IPL_assert(virtio_is_supported(vdev->schid), "PE");
+ if (!virtio_is_supported(vdev->schid)) {
+ puts("PE");
+ return -ENODEV;
+ }
/* device ID has been established now */
vdev->config.blk.blk_size = 0; /* mark "illegal" - setup started... */
@@ -235,8 +238,10 @@ void virtio_setup_ccw(VDev *vdev)
run_ccw(vdev, CCW_CMD_VDEV_RESET, NULL, 0, false);
status = VIRTIO_CONFIG_S_ACKNOWLEDGE;
- rc = run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false);
- IPL_assert(rc == 0, "Could not write ACKNOWLEDGE status to host");
+ if (run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false)) {
+ puts("Could not write ACKNOWLEDGE status to host");
+ return -EIO;
+ }
switch (vdev->senseid.cu_model) {
case VIRTIO_ID_NET:
@@ -255,27 +260,37 @@ void virtio_setup_ccw(VDev *vdev)
cfg_size = sizeof(vdev->config.scsi);
break;
default:
- panic("Unsupported virtio device\n");
+ puts("Unsupported virtio device");
+ return -ENODEV;
}
status |= VIRTIO_CONFIG_S_DRIVER;
- rc = run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false);
- IPL_assert(rc == 0, "Could not write DRIVER status to host");
+ if (run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false)) {
+ puts("Could not write DRIVER status to host");
+ return -EIO;
+ }
/* Feature negotiation */
for (i = 0; i < ARRAY_SIZE(vdev->guest_features); i++) {
feats.features = 0;
feats.index = i;
- rc = run_ccw(vdev, CCW_CMD_READ_FEAT, &feats, sizeof(feats), false);
- IPL_assert(rc == 0, "Could not get features bits");
+ if (run_ccw(vdev, CCW_CMD_READ_FEAT, &feats, sizeof(feats), false)) {
+ puts("Could not get features bits");
+ return -EIO;
+ }
+
vdev->guest_features[i] &= bswap32(feats.features);
feats.features = bswap32(vdev->guest_features[i]);
- rc = run_ccw(vdev, CCW_CMD_WRITE_FEAT, &feats, sizeof(feats), false);
- IPL_assert(rc == 0, "Could not set features bits");
+ if (run_ccw(vdev, CCW_CMD_WRITE_FEAT, &feats, sizeof(feats), false)) {
+ puts("Could not set features bits");
+ return -EIO;
+ }
}
- rc = run_ccw(vdev, CCW_CMD_READ_CONF, &vdev->config, cfg_size, false);
- IPL_assert(rc == 0, "Could not get virtio device configuration");
+ if (run_ccw(vdev, CCW_CMD_READ_CONF, &vdev->config, cfg_size, false)) {
+ puts("Could not get virtio device configuration");
+ return -EIO;
+ }
for (i = 0; i < vdev->nr_vqs; i++) {
VqInfo info = {
@@ -289,19 +304,27 @@ void virtio_setup_ccw(VDev *vdev)
.num = 0,
};
- rc = run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config),
false);
- IPL_assert(rc == 0, "Could not get virtio device VQ configuration");
+ if (run_ccw(vdev, CCW_CMD_READ_VQ_CONF, &config, sizeof(config),
+ false)) {
+ puts("Could not get virtio device VQ config");
+ return -EIO;
+ }
info.num = config.num;
vring_init(&vdev->vrings[i], &info);
vdev->vrings[i].schid = vdev->schid;
- IPL_assert(
- run_ccw(vdev, CCW_CMD_SET_VQ, &info, sizeof(info), false) == 0,
- "Cannot set VQ info");
+ if (run_ccw(vdev, CCW_CMD_SET_VQ, &info, sizeof(info), false)) {
+ puts("Cannot set VQ info");
+ return -EIO;
+ }
}
status |= VIRTIO_CONFIG_S_DRIVER_OK;
- rc = run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false);
- IPL_assert(rc == 0, "Could not write DRIVER_OK status to host");
+ if (run_ccw(vdev, CCW_CMD_WRITE_STATUS, &status, sizeof(status), false)) {
+ puts("Could not write DRIVER_OK status to host");
+ return -EIO;
+ }
+
+ return 0;
}
bool virtio_is_supported(SubChannelId schid)
--
2.45.1
- Re: [PATCH 08/18] pc-bios/s390-ccw: Remove panics from ECKD IPL path, (continued)
- [PATCH 09/18] pc-bios/s390-ccw: Remove panics from SCSI IPL path, jrossi, 2024/09/26
- [PATCH 11/18] pc-bios/s390-ccw: Remove panics from Netboot IPL path, jrossi, 2024/09/26
- [PATCH 13/18] include/hw/s390x: Add include files for common IPL structs, jrossi, 2024/09/26
- [PATCH 12/18] pc-bios/s390-ccw: Enable failed IPL to return after error,
jrossi <=
- [PATCH 10/18] pc-bios/s390-ccw: Remove panics from DASD IPL path, jrossi, 2024/09/26
- [PATCH 14/18] s390x: Add individual loadparm assignment to CCW device, jrossi, 2024/09/26
- [PATCH 15/18] hw/s390x: Build an IPLB for each boot device, jrossi, 2024/09/26
- [PATCH 16/18] s390x: Rebuild IPLB for SCSI device directly from DIAG308, jrossi, 2024/09/26