qemu-stable
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH for-9.0 v3] vdpa-dev: Fix initialisation order to restore VDU


From: Michael S. Tsirkin
Subject: Re: [PATCH for-9.0 v3] vdpa-dev: Fix initialisation order to restore VDUSE compatibility
Date: Mon, 18 Mar 2024 05:03:34 -0400

On Fri, Mar 15, 2024 at 04:59:49PM +0100, Kevin Wolf wrote:
> VDUSE requires that virtqueues are first enabled before the DRIVER_OK
> status flag is set; with the current API of the kernel module, it is
> impossible to enable the opposite order in our block export code because
> userspace is not notified when a virtqueue is enabled.
> 
> This requirement also mathces the normal initialisation order as done by
> the generic vhost code in QEMU. However, commit 6c482547 accidentally
> changed the order for vdpa-dev and broke access to VDUSE devices with
> this.
> 
> This changes vdpa-dev to use the normal order again and use the standard
> vhost callback .vhost_set_vring_enable for this. VDUSE devices can be
> used with vdpa-dev again after this fix.
> 
> vhost_net intentionally avoided enabling the vrings for vdpa and does
> this manually later while it does enable them for other vhost backends.
> Reflect this in the vhost_net code and return early for vdpa, so that
> the behaviour doesn't change for this device.
> 
> Cc: qemu-stable@nongnu.org
> Fixes: 6c4825476a4351530bcac17abab72295b75ffe98

Wrong format for the fixes tag.

Fixes: 6c4825476a ("vdpa: move vhost_vdpa_set_vring_ready to the caller")

is the right one.


> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
> ---
> v2:
> - Actually make use of the @enable parameter
> - Change vhost_net to preserve the current behaviour
> 
> v3:
> - Updated trace point [Stefano]
> - Fixed typo in comment [Stefano]
> 
>  hw/net/vhost_net.c     | 10 ++++++++++
>  hw/virtio/vdpa-dev.c   |  5 +----
>  hw/virtio/vhost-vdpa.c | 29 ++++++++++++++++++++++++++---
>  hw/virtio/vhost.c      |  8 +++++++-
>  hw/virtio/trace-events |  2 +-
>  5 files changed, 45 insertions(+), 9 deletions(-)
> 
> diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
> index e8e1661646..fd1a93701a 100644
> --- a/hw/net/vhost_net.c
> +++ b/hw/net/vhost_net.c
> @@ -541,6 +541,16 @@ int vhost_set_vring_enable(NetClientState *nc, int 
> enable)
>      VHostNetState *net = get_vhost_net(nc);
>      const VhostOps *vhost_ops = net->dev.vhost_ops;
>  
> +    /*
> +     * vhost-vdpa network devices need to enable dataplane virtqueues after
> +     * DRIVER_OK, so they can recover device state before starting dataplane.
> +     * Because of that, we don't enable virtqueues here and leave it to
> +     * net/vhost-vdpa.c.
> +     */
> +    if (nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
> +        return 0;
> +    }
> +
>      nc->vring_enable = enable;
>  
>      if (vhost_ops && vhost_ops->vhost_set_vring_enable) {
> diff --git a/hw/virtio/vdpa-dev.c b/hw/virtio/vdpa-dev.c
> index eb9ecea83b..13e87f06f6 100644
> --- a/hw/virtio/vdpa-dev.c
> +++ b/hw/virtio/vdpa-dev.c
> @@ -253,14 +253,11 @@ static int vhost_vdpa_device_start(VirtIODevice *vdev, 
> Error **errp)
>  
>      s->dev.acked_features = vdev->guest_features;
>  
> -    ret = vhost_dev_start(&s->dev, vdev, false);
> +    ret = vhost_dev_start(&s->dev, vdev, true);
>      if (ret < 0) {
>          error_setg_errno(errp, -ret, "Error starting vhost");
>          goto err_guest_notifiers;
>      }
> -    for (i = 0; i < s->dev.nvqs; ++i) {
> -        vhost_vdpa_set_vring_ready(&s->vdpa, i);
> -    }
>      s->started = true;
>  
>      /*
> diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
> index ddae494ca8..31453466af 100644
> --- a/hw/virtio/vhost-vdpa.c
> +++ b/hw/virtio/vhost-vdpa.c
> @@ -886,19 +886,41 @@ static int vhost_vdpa_get_vq_index(struct vhost_dev 
> *dev, int idx)
>      return idx;
>  }
>  
> -int vhost_vdpa_set_vring_ready(struct vhost_vdpa *v, unsigned idx)
> +static int vhost_vdpa_set_vring_enable_one(struct vhost_vdpa *v, unsigned 
> idx,
> +                                           int enable)
>  {
>      struct vhost_dev *dev = v->dev;
>      struct vhost_vring_state state = {
>          .index = idx,
> -        .num = 1,
> +        .num = enable,
>      };
>      int r = vhost_vdpa_call(dev, VHOST_VDPA_SET_VRING_ENABLE, &state);
>  
> -    trace_vhost_vdpa_set_vring_ready(dev, idx, r);
> +    trace_vhost_vdpa_set_vring_enable_one(dev, idx, enable, r);
>      return r;
>  }
>  
> +static int vhost_vdpa_set_vring_enable(struct vhost_dev *dev, int enable)
> +{
> +    struct vhost_vdpa *v = dev->opaque;
> +    unsigned int i;
> +    int ret;
> +
> +    for (i = 0; i < dev->nvqs; ++i) {
> +        ret = vhost_vdpa_set_vring_enable_one(v, i, enable);
> +        if (ret < 0) {
> +            return ret;
> +        }
> +    }
> +
> +    return 0;
> +}
> +
> +int vhost_vdpa_set_vring_ready(struct vhost_vdpa *v, unsigned idx)
> +{
> +    return vhost_vdpa_set_vring_enable_one(v, idx, 1);
> +}
> +
>  static int vhost_vdpa_set_config_call(struct vhost_dev *dev,
>                                         int fd)
>  {
> @@ -1514,6 +1536,7 @@ const VhostOps vdpa_ops = {
>          .vhost_set_features = vhost_vdpa_set_features,
>          .vhost_reset_device = vhost_vdpa_reset_device,
>          .vhost_get_vq_index = vhost_vdpa_get_vq_index,
> +        .vhost_set_vring_enable = vhost_vdpa_set_vring_enable,
>          .vhost_get_config  = vhost_vdpa_get_config,
>          .vhost_set_config = vhost_vdpa_set_config,
>          .vhost_requires_shm_log = NULL,
> diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
> index 2c9ac79468..0000a66186 100644
> --- a/hw/virtio/vhost.c
> +++ b/hw/virtio/vhost.c
> @@ -1984,7 +1984,13 @@ static int vhost_dev_set_vring_enable(struct vhost_dev 
> *hdev, int enable)
>      return hdev->vhost_ops->vhost_set_vring_enable(hdev, enable);
>  }
>  
> -/* Host notifiers must be enabled at this point. */
> +/*
> + * Host notifiers must be enabled at this point.
> + *
> + * If @vrings is true, this function will enable all vrings before starting 
> the
> + * device. If it is false, the vring initialization is left to be done by the
> + * caller.
> + */
>  int vhost_dev_start(struct vhost_dev *hdev, VirtIODevice *vdev, bool vrings)
>  {
>      int i, r;
> diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
> index 77905d1994..3f18536868 100644
> --- a/hw/virtio/trace-events
> +++ b/hw/virtio/trace-events
> @@ -48,7 +48,7 @@ vhost_vdpa_set_features(void *dev, uint64_t features) "dev: 
> %p features: 0x%"PRI
>  vhost_vdpa_get_device_id(void *dev, uint32_t device_id) "dev: %p device_id 
> %"PRIu32
>  vhost_vdpa_reset_device(void *dev) "dev: %p"
>  vhost_vdpa_get_vq_index(void *dev, int idx, int vq_idx) "dev: %p idx: %d vq 
> idx: %d"
> -vhost_vdpa_set_vring_ready(void *dev, unsigned i, int r) "dev: %p, idx: %u, 
> r: %d"
> +vhost_vdpa_set_vring_enable_one(void *dev, unsigned i, int enable, int r) 
> "dev: %p, idx: %u, enable: %u, r: %d"
>  vhost_vdpa_dump_config(void *dev, const char *line) "dev: %p %s"
>  vhost_vdpa_set_config(void *dev, uint32_t offset, uint32_t size, uint32_t 
> flags) "dev: %p offset: %"PRIu32" size: %"PRIu32" flags: 0x%"PRIx32
>  vhost_vdpa_get_config(void *dev, void *config, uint32_t config_len) "dev: %p 
> config: %p config_len: %"PRIu32
> -- 
> 2.44.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]