Re: [Therion] Printing xvi maps (done with pdf's)

[Cooper, Ben]

Well, I've now upgraded, but am getting strange results.  See attached
PDFs.  The raw XVI are OK, but in NewPassage_CL.PDF, each LRUD
parallelogram seems to be flipped over.  Below is the raw NewPassage.th
file.  Note that the centreline output of the entire cave (UF_CL.pdf)
handles NewPassage slightly better (but still not perfectly) than
NewPassage on its own.  

Am I doing something wrong?
- Ben


encoding  utf-8
survey NewPassage -title "New Passage"
  centreline
    equate address@hidden address@hidden
  endcentreline
  survey Leg1   # From Boulder Choke to Walk The Plank
    centerline    
      flags duplicate # duplicate of Boulder Choke legs for reference in
th2 file.
        extend right
        data normal from to length compass clino left right up down
        bc32 bc33       2.33    201     -54     1.1     0.3     0.5
0.3     #33 (Through Easy Squeeze)
        data normal from to length compass clino
        bc33 bc34       3.07    239     -39         
        data normal from to length compass clino left right up down
        bc34 bc35       2.49    231     -57     0.9     0.3     0.5
0.6     #35
        bc35 bc36       2.13    194     -37     0.4     0       0.2
0.8     #36
        bc36 bc37       2.5     141     +06     0.5     0       0.8
0       #37
        bc37 bc38       3.74    139     -09     1.6     0.2     0.7
1.5     #38
        bc38 bc39a      2.75    136     -10     0       1.15    1.6
1.0     #39
          bc39a 1               0.01    136     -10     6       1.15
5       1.0     #1 LRUD Est
      flags not duplicate
 
        extend left
        data normal from to length compass clino
        1 bc40  11      052     +43     

        extend right
        mark 1 painted
        data normal\
        from    to      length  compass clino   left    right   up
down
        1       2       29.46   153     -25     4.3     2.4     4.8
1.4 #2
        station 2 "Emergency Dump"
        2       3       16.09   144     -04     3.4     3.0     2.9
1.4 #3
        3       4       11.44   142     -11     4.2     2.0     0.9
1.6 #4
        4       5       9.48    142     -29     1.5     1.3     3.4
1.2 #5
        5       6       6.08    166.5   -18     0.2     0.4     2.2
0.8 #6
        6       7       3.22    154     -09     2.0     0.8     0.5
0.5 #7
        7       8       1.75    140     -04     1.7     0.6     1.1
1.0 #8
        8       9       9.27    178.5   -12.5   1.2     1.3     0.5
1.0 #9
        9       10      1.6     159.5   -20.5   0.2     1.3     0.6
0.6 #10
        10      11      2.95    156     -11     0.9     0.3     1.0
0.2 #11
        11      12      5.36    131     +03     1.5     1.2     6.7
0.5 #12
        12      13      8.17    124.5   +06     0       0.7     6.2
1.6 #13
        13      14      8.37    132     +7.5    0.9     2.7     2.2
1.8 #14
        14      15      8.81    147     -10     0.8     2.1     5.4
1.4 #15
        15      16      5.75    235     -10.5   0       1.0     5.6
1.0 #16
        16      17      6.54    272     +2      0.7     0       5.1
1.3 #17
        17      18      2.81    245     -19     0       0.3     0.4
0.6 #18
        18      19      7.54    262     0       0       1.7     5.1
0.8 #19
        19      20      6.03    263     -2      1.0     0.6     3.6
0.7 #20
        20      21      2.26    205     -2      0       0.6     0.6
0.5 #21
        20      20a     4       325     0       0       1       2
0.5 #20a estimated LRUD
        21      22      4.58    162     +9      0.7     0       5.2
1.3 #22
        22      23      4.15    144     -4      1.0     0.2     0.5
1.0 #23
        23      24      13.68   140.5   -2.5    1.5     1.5     4.9
0.6 #24
        24      25      8.61    216     +6      0       2.3     1.5
1.8 #25
        25      26      4.58    304     -13     1.1     0.9     1.8
1.0 #26
        26      27      12.65   281     +1      0.4     1.2     2.2
1.3 #27
        27      28      5.59    304     -5      0.8     1.2     1.2
0.9 #28
        28      29      5.46    275     -6      0.2     1.0     0.5
0.4 #29
        29      30      3.63    312     +2      0.4     0       2.7
0.5 #30
        #31 30  10.16   103     -3.5    0.5     0.8     0.2     1.4 #31
        30      31      10.16   283     +3.5    0.5     0.8     0.2
1.4 #31 REVERSED
        31      32      4.48    276     +3      1.0     0.4     1.6
1.4 #32
        32      33      8.42    286     -5      1.5     0.8     1.8
0.7 #33
        33      34      14.82   271     +1      0.3     2.2     3.2
1.2 #34
        34      35      20.06   290.5   +2      2.5     1       2
1.5 #35 estimated LRUD
        mark 35 painted # address@hidden
    endcentreline
  endsurvey # Leg1
  

-----Original Message-----
From: address@hidden [mailto:address@hidden On
Behalf Of Cooper, Ben
Sent: 11 November 2007 19:56
To: address@hidden
Subject: Re: [Therion] Printing xvi maps (done with pdf's)

Aha - thanks Stacho.  I'm still on 0.5.0.  Upgrading now...!
Regards,
- Ben 

-----Original Message-----
From: address@hidden [mailto:address@hidden On
Behalf Of Stacho Mudrak
Sent: 08 November 2007 19:53
To: address@hidden
Subject: Re: [Therion] Printing xvi maps (done with pdf's)

Just few remarks:

1. Did you use latest version of therion (0.5.1)?  It is a new feature 
in that version.

2. You may also use other colors that gray. Just add
   color map-fg [100 50 50]
to your layout. Numbers mean intensities of red, green and blue.

3. Options in layout and export command are the same. In layout, you can
use

color map-fg 50

and in export command option -layout-color map-fg 50

HTH, S.

Bruce Mutton wrote:
> Ben
> I tried Stacho's suggestion, and it worked fine, although I think he
> abbreviated the syntax of the export command a bit much.  Here's my
more
> verbose version...
> 
> layout bruce-map-export
>   north true
>   scale 1 500
>   base-scale 1 500 
>   units metric 
>     
>   page-grid on
>   grid-size 100 100 100 metres
> #  layout-map-header 0 0 s  #causes error?
>   legend on
>   statistics explo all
>   statistics topo all
>   statistics carto all
>   statistics copyright all
>   debug on
> endlayout
> 
> export map -projection plan -layout bruce-map-export \
>   -layout-color map-fg 90 \  
>   -output SurveyPlan.pdf -fmt pdf  
> 
> Try this Ben.  The 90 gives a passage that is more lightly shaded than
50.
> Good Luck
> Bruce
> 
> -----Original Message-----
> From: address@hidden [mailto:address@hidden On
Behalf
> Of Cooper, Ben
> Sent: Friday, 9 November 2007 3:44 a.m.
> To: address@hidden
> Subject: Re: [Therion] Printing xvi maps
> 
> Hi Stacho,
> I've been wanting to get print-outs of XVI, too, so I am verry
> interested in your recommendation, below.  I've tried it, but this is
> the result I get: only the centreline is visible, not LRUD.
> - Ben Cooper 
> 
> -----Original Message-----
> From: address@hidden [mailto:address@hidden On
> Behalf Of Stacho Mudrak
> Sent: 06 November 2007 12:24
> To: address@hidden
> Subject: Re: [Therion] Printing xvi maps
> 
> 
> ...<text removed>...
> 
> Stacho's  Example:
> 
> source
> map centerline-map
>   my-survey
> endmap
> endsource
> 
> select centerline-map
> export map.pdf -layout-color map-fg 50 -layout-scale 1 500
> 
> 
> ... where my-survey is the name of top-level survey. 
> 
> ...<text removed>...
> 
> Regards, S.
> 
> _______________________________________________
> Therion mailing list
> address@hidden
> http://www.speleo.sk/mailman/listinfo/therion
_______________________________________________
Therion mailing list
address@hidden
http://www.speleo.sk/mailman/listinfo/therion
_______________________________________________
Therion mailing list
address@hidden
http://www.speleo.sk/mailman/listinfo/therion

UF_CL.pdf
Description: UF_CL.pdf

NewPassage_CL.pdf
Description: NewPassage_CL.pdf

_______________________________________________
Therion mailing list
address@hidden
http://www.speleo.sk/mailman/listinfo/therion