Re: [Therion] Printing xvi maps (done with pdf's)

[Stacho Mudrak]

Quoting "Cooper, Ben" <address@hidden>:
> I will extract the relevant files and generate the problem tonight and
> send in.  The interesting thing is that the raw xvi is OK, whereas the
> PDF is muddled up. 

This would be great! The PDF code is just <copy & paste> of XVI code - so
obviosly I copied something wrong.

Regards, S.


> Regards,
> - Ben
> 
> 
> -----Original Message-----
> From: address@hidden [mailto:address@hidden On
> Behalf Of Stacho Mudrak
> Sent: 12 November 2007 20:37
> To: address@hidden
> Subject: Re: [Therion] Printing xvi maps (done with pdf's)
> 
> Hmmm, there really seems to be some BUG in the program. Are you able to 
> separate files, which produce these strange maps (including config
> files)?
> 
> It would be great, if you could send them to me that I can debug the 
> program. With your file attached - I receive (as Bruce did) same more or
> 
> less correct result. But there is evidently some problem with LRUD 
> orientation in the program.
> 
> Thanks, S.
> 
> Cooper, Ben wrote:
> > Well, I've now upgraded, but am getting strange results.  See attached
> > PDFs.  The raw XVI are OK, but in NewPassage_CL.PDF, each LRUD
> > parallelogram seems to be flipped over.  Below is the raw
> NewPassage.th
> > file.  Note that the centreline output of the entire cave (UF_CL.pdf)
> > handles NewPassage slightly better (but still not perfectly) than
> > NewPassage on its own.  
> > 
> > Am I doing something wrong?
> > - Ben
> > 
> > 
> > encoding  utf-8
> > survey NewPassage -title "New Passage"
> >   centreline
> >     equate address@hidden address@hidden
> >   endcentreline
> >   survey Leg1       # From Boulder Choke to Walk The Plank
> >     centerline    
> >       flags duplicate # duplicate of Boulder Choke legs for reference
> in
> > th2 file.
> >         extend right
> >         data normal from to length compass clino left right up down
> >         bc32 bc33   2.33    201     -54     1.1     0.3     0.5
> > 0.3 #33 (Through Easy Squeeze)
> >         data normal from to length compass clino
> >         bc33 bc34   3.07    239     -39         
> >         data normal from to length compass clino left right up down
> >         bc34 bc35   2.49    231     -57     0.9     0.3     0.5
> > 0.6 #35
> >         bc35 bc36   2.13    194     -37     0.4     0       0.2
> > 0.8 #36
> >         bc36 bc37   2.5     141     +06     0.5     0       0.8
> > 0   #37
> >         bc37 bc38   3.74    139     -09     1.6     0.2     0.7
> > 1.5 #38
> >         bc38 bc39a  2.75    136     -10     0       1.15    1.6
> > 1.0 #39
> >       bc39a 1               0.01    136     -10     6       1.15
> > 5   1.0     #1 LRUD Est
> >       flags not duplicate
> >  
> >     extend left
> >     data normal from to length compass clino
> >     1 bc40  11      052     +43     
> > 
> >     extend right
> >     mark 1 painted
> >     data normal\
> >     from    to      length  compass clino   left    right   up
> > down
> >     1       2       29.46   153     -25     4.3     2.4     4.8
> > 1.4 #2
> >     station 2 "Emergency Dump"
> >     2       3       16.09   144     -04     3.4     3.0     2.9
> > 1.4 #3
> >     3       4       11.44   142     -11     4.2     2.0     0.9
> > 1.6 #4
> >     4       5       9.48    142     -29     1.5     1.3     3.4
> > 1.2 #5
> >     5       6       6.08    166.5   -18     0.2     0.4     2.2
> > 0.8 #6
> >     6       7       3.22    154     -09     2.0     0.8     0.5
> > 0.5 #7
> >     7       8       1.75    140     -04     1.7     0.6     1.1
> > 1.0 #8
> >     8       9       9.27    178.5   -12.5   1.2     1.3     0.5
> > 1.0 #9
> >     9       10      1.6     159.5   -20.5   0.2     1.3     0.6
> > 0.6 #10
> >     10      11      2.95    156     -11     0.9     0.3     1.0
> > 0.2 #11
> >     11      12      5.36    131     +03     1.5     1.2     6.7
> > 0.5 #12
> >     12      13      8.17    124.5   +06     0       0.7     6.2
> > 1.6 #13
> >     13      14      8.37    132     +7.5    0.9     2.7     2.2
> > 1.8 #14
> >     14      15      8.81    147     -10     0.8     2.1     5.4
> > 1.4 #15
> >     15      16      5.75    235     -10.5   0       1.0     5.6
> > 1.0 #16
> >     16      17      6.54    272     +2      0.7     0       5.1
> > 1.3 #17
> >     17      18      2.81    245     -19     0       0.3     0.4
> > 0.6 #18
> >     18      19      7.54    262     0       0       1.7     5.1
> > 0.8 #19
> >     19      20      6.03    263     -2      1.0     0.6     3.6
> > 0.7 #20
> >     20      21      2.26    205     -2      0       0.6     0.6
> > 0.5 #21
> >     20      20a     4       325     0       0       1       2
> > 0.5 #20a estimated LRUD
> >     21      22      4.58    162     +9      0.7     0       5.2
> > 1.3 #22
> >     22      23      4.15    144     -4      1.0     0.2     0.5
> > 1.0 #23
> >     23      24      13.68   140.5   -2.5    1.5     1.5     4.9
> > 0.6 #24
> >     24      25      8.61    216     +6      0       2.3     1.5
> > 1.8 #25
> >     25      26      4.58    304     -13     1.1     0.9     1.8
> > 1.0 #26
> >     26      27      12.65   281     +1      0.4     1.2     2.2
> > 1.3 #27
> >     27      28      5.59    304     -5      0.8     1.2     1.2
> > 0.9 #28
> >     28      29      5.46    275     -6      0.2     1.0     0.5
> > 0.4 #29
> >     29      30      3.63    312     +2      0.4     0       2.7
> > 0.5 #30
> >     #31 30  10.16   103     -3.5    0.5     0.8     0.2     1.4 #31
> >     30      31      10.16   283     +3.5    0.5     0.8     0.2
> > 1.4 #31     REVERSED
> >     31      32      4.48    276     +3      1.0     0.4     1.6
> > 1.4 #32
> >     32      33      8.42    286     -5      1.5     0.8     1.8
> > 0.7 #33
> >     33      34      14.82   271     +1      0.3     2.2     3.2
> > 1.2 #34
> >     34      35      20.06   290.5   +2      2.5     1       2
> > 1.5 #35 estimated LRUD
> >     mark 35 painted # address@hidden
> >     endcentreline
> >   endsurvey # Leg1
> >   
> > 
> > -----Original Message-----
> > From: address@hidden [mailto:address@hidden On
> > Behalf Of Cooper, Ben
> > Sent: 11 November 2007 19:56
> > To: address@hidden
> > Subject: Re: [Therion] Printing xvi maps (done with pdf's)
> > 
> > Aha - thanks Stacho.  I'm still on 0.5.0.  Upgrading now...!
> > Regards,
> > - Ben 
> > 
> > -----Original Message-----
> > From: address@hidden [mailto:address@hidden On
> > Behalf Of Stacho Mudrak
> > Sent: 08 November 2007 19:53
> > To: address@hidden
> > Subject: Re: [Therion] Printing xvi maps (done with pdf's)
> > 
> > Just few remarks:
> > 
> > 1. Did you use latest version of therion (0.5.1)?  It is a new feature
> 
> > in that version.
> > 
> > 2. You may also use other colors that gray. Just add
> >    color map-fg [100 50 50]
> > to your layout. Numbers mean intensities of red, green and blue.
> > 
> > 3. Options in layout and export command are the same. In layout, you
> can
> > use
> > 
> > color map-fg 50
> > 
> > and in export command option -layout-color map-fg 50
> > 
> > HTH, S.
> > 
> > Bruce Mutton wrote:
> >> Ben
> >> I tried Stacho's suggestion, and it worked fine, although I think he
> >> abbreviated the syntax of the export command a bit much.  Here's my
> > more
> >> verbose version...
> >>
> >> layout bruce-map-export
> >>   north true
> >>   scale 1 500
> >>   base-scale 1 500 
> >>   units metric 
> >>     
> >>   page-grid on
> >>   grid-size 100 100 100 metres
> >> #  layout-map-header 0 0 s  #causes error?
> >>   legend on
> >>   statistics explo all
> >>   statistics topo all
> >>   statistics carto all
> >>   statistics copyright all
> >>   debug on
> >> endlayout
> >>
> >> export map -projection plan -layout bruce-map-export \
> >>   -layout-color map-fg 90 \  
> >>   -output SurveyPlan.pdf -fmt pdf  
> >>
> >> Try this Ben.  The 90 gives a passage that is more lightly shaded
> than
> > 50.
> >> Good Luck
> >> Bruce
> >>
> >> -----Original Message-----
> >> From: address@hidden [mailto:address@hidden On
> > Behalf
> >> Of Cooper, Ben
> >> Sent: Friday, 9 November 2007 3:44 a.m.
> >> To: address@hidden
> >> Subject: Re: [Therion] Printing xvi maps
> >>
> >> Hi Stacho,
> >> I've been wanting to get print-outs of XVI, too, so I am verry
> >> interested in your recommendation, below.  I've tried it, but this is
> >> the result I get: only the centreline is visible, not LRUD.
> >> - Ben Cooper 
> >>
> >> -----Original Message-----
> >> From: address@hidden [mailto:address@hidden On
> >> Behalf Of Stacho Mudrak
> >> Sent: 06 November 2007 12:24
> >> To: address@hidden
> >> Subject: Re: [Therion] Printing xvi maps
> >>
> >>
> >> ...<text removed>...
> >>
> >> Stacho's  Example:
> >>
> >> source
> >> map centerline-map
> >>   my-survey
> >> endmap
> >> endsource
> >>
> >> select centerline-map
> >> export map.pdf -layout-color map-fg 50 -layout-scale 1 500
> >>
> >>
> >> ... where my-survey is the name of top-level survey. 
> >>
> >> ...<text removed>...
> >>
> >> Regards, S.
> >>
> >> _______________________________________________
> >> Therion mailing list
> >> address@hidden
> >> http://www.speleo.sk/mailman/listinfo/therion
> > _______________________________________________
> > Therion mailing list
> > address@hidden
> > http://www.speleo.sk/mailman/listinfo/therion
> > _______________________________________________
> > Therion mailing list
> > address@hidden
> > http://www.speleo.sk/mailman/listinfo/therion
> > 
> > 
> >
> ------------------------------------------------------------------------
> > 
> > _______________________________________________
> > Therion mailing list
> > address@hidden
> > http://www.speleo.sk/mailman/listinfo/therion
> _______________________________________________
> Therion mailing list
> address@hidden
> http://www.speleo.sk/mailman/listinfo/therion
> _______________________________________________
> Therion mailing list
> address@hidden
> http://www.speleo.sk/mailman/listinfo/therion
> 


_______________________________________________
Therion mailing list
address@hidden
http://www.speleo.sk/mailman/listinfo/therion