Re: [Tlf-devel] Using TLF with hamlib

[Rein Couperus PA0R]

I have tlf-0.9.23 running without problem with hamblib 1.2.4 and the
ORION (rig nr. 1608). Also no problem with the K2.

my config.h says:

/* Define if you have the <hamlib/riglist.h> header file. */
/* #undef HAVE_HAMLIB_RIGLIST_H */

/* Define if you have the <hamlib/rig.h> header file. */
#define HAVE_HAMLIB_RIG_H 1

/* Define if you have the <inttypes.h> header file. */
#define HAVE_INTTYPES_H 1

/* Define if you have the `hamlib' library (-lhamlib). */
#define HAVE_LIBHAMLIB 1

Looks like tlf does not need riglist.h

Moreover, the error message you get is not from tlf, but from hamlib, so
I would look in that direction...

Anybody else have problems with the TS570D ?

Rein PA0R





On Mon, 2005-05-02 at 16:55 -0700, Bob Nielsen wrote:
> I finally got around to trying to interface my TS-570D to my computer.  
> It works fine with grig, but I haven't been able to get the rig to talk 
> to TLF.
> 
> I ran configure with --enable-hamlib.  It appears to recognize hamlib:
> 
> checking for main in -lhamlib... yes
> checking hamlib/rig.h usability... yes
> checking hamlib/rig.h presence... yes
> checking for hamlib/rig.h... yes
> enabling hamlib support
> 
> However, checking the resultant config.h, I see:
> 
> 
> /* Define if you have the <hamlib/riglist.h> header file. */
> /* #undef HAVE_HAMLIB_RIGLIST_H */
> 
> However, /usr/include/hamlib/riglist.h exists.
> 
> I compiled TLF and enabled rig control in logcfg.dat, setting RIGMODEL, 
> RIGSPEED and RIGPORT to the appropriate values.  When I run TLF, I get 
> the following:
> 
> Trying to start rig ctrl
> rig_open: error
> 
> Editing config.h to define HAVE_HAMLIB_RIGLIST_H doesn't help
> 
> TLF is version 0.9.23 and hamlib-dev is version 1.2.4-1.  The system is
> a 1.2 GHz Celeron running Libranet 2.8.1 updated with packages from
> Debian Sarge and Sid.
> 
> Any ideas?
> 
> TIA and 73,
> 
> Bob, N7XY
>