[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Uisp-dev] Writing the fuse bits with avr910?
From: |
Bernd Trog |
Subject: |
[Uisp-dev] Writing the fuse bits with avr910? |
Date: |
Thu, 20 Feb 2003 05:32:06 -0800 (PST) |
Hi,
anybody know which avr910-firmware version supports
reading and writing fuse bits with a ATmega16?
>uisp-20021201/src/uisp -v=3 -dprog=avr910 -dserial=/dev/ttyS2 -dpart=S8515
--rd_fuses
Programmer Information:
Software Version: 2.0, Hardware Version: 1.0
Address Auto Increment Optimization Enabled
Vendor Code: 0x1e
Part Family: 0x94
Part Number: 0x03
Atmel AVR ATmega16 is found.
Page Write Enabled, size=128
FLASH Write Delay (t_wd_flash): 12500 us
EEPROM Write Delay (t_wd_eeprom): 25000 us
Device is not responding correctly.
Version 2.0 does not :-(
Bernd
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/
- [Uisp-dev] Writing the fuse bits with avr910?,
Bernd Trog <=