Re: [Uisp-dev] STK500 / Atmel AVRISP query.

[E . Weddington]

> Hello Uros!
> 
>   First off, thanks VERY much for your efforts with uisp 
and for 
> sharing it!
> 
>   I have a problem with my motherboard (Sis chipset) and 
programming 
> through the parallel port with either the dapa or 
stk200/300 under 
> linux with them.  Strangely they work flawlessly under 
windoz (well 
> the Sample cable (same as dapa, different pinout) and 
stk200/300) 
> :-(.
> 
>   I am, as you can imaging, getting rather tired of doing 
my stuff 
> with avr-gcc under linux and booting windoz to program 
chips :-/.
> 
>   My question is related to the Atmel AVRISP:
> 
> http://rocky.digikey.com/WebLib/Atmel/Web%
20Photos/ATAVRISP.jpg
> 
> http://rocky.digikey.com/WebLib/Atmel/Web%20Data/ATAVRISP%
20Flyer.pdf
> 
> I have been told that this is a "stand alone stk500 
programming 
> section".  I am a bit confused on this issue and wonder 
if you can 
> tell me if uisp supports this programmer?  In case it is 
important 
> I am using 2313s, Mega8Ls, Mega103s and Mega323s.  I'm 
desperate 
> enough to actually purchase a serial programmer :-(.
> 
> Thanks VERY much for any help you can be in this matter, 
your 
> efforts are greatly appreciated!
> 
> Take care, Vikki.


Um, not to knock uisp or anything, but there is the 
alternative: avrdude
<http://savannah.nongnu.org/projects/avrdude>

Eric