[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Uisp-dev] downloading to atmega162
From: |
Theodore A. Roth |
Subject: |
Re: [Uisp-dev] downloading to atmega162 |
Date: |
Mon, 20 Sep 2004 13:32:24 -0700 (PDT) |
On Mon, 20 Sep 2004, Owen S. Osborn wrote:
> I've been using uisp in dapa mode with a home brew cable, and this method
> has worked great with the atmega8 chip. But while using this same method
> with the atmega162, uisp indicates that the chip is not responding and might
> be damaged. (there is really no response as I probed the data out pin of the
> microcontroller with scope, and it is low during entire process). I have
> double
> checked the wiring, and tried 5 different atmega162 chips, but none respond
> (i have also tried with and without external oscillator).
> The strange thing is that with the same wiring the atmega8 responds while
> the 162 does not, and I can't find anyting in the datasheets indicating
> additional connections are needed. I've also tried avrdude, and the problem
> is the same: atmega8 works, while atmega162 doesn't respond.
> Am I missing something here?, or could it be that all 5 chips I;ve tried
> are
> dead? any help is greatly appreciated....
Did you check the fusing of the mega162?
---
Ted Roth
PGP Key ID: 0x18F846E9
Jabber ID: address@hidden