[Uisp-dev] [bugs #11371] --verify hangs uisp ATMEGA128

[Margarita Manterola]

This mail is an automated notification from the bugs tracker
 of the project: AVR In-System Programmer.

/**************************************************************************/
[bugs #11371] Latest Modifications:

Changes by: 
                Margarita Manterola <address@hidden>
'Date: 
                Tue 12/28/2004 at 15:05 (America/Buenos_Aires)

------------------ Additional Follow-up Comments ----------------------------
Could you tell me what's the program's output when you do:
uisp -v=4 -dprog=stk500 -dserial=/dev/ttyS1

When you do:
uisp -v=4 -dprog=stk500 -dserial=/dev/ttyS1 -dpart=atmega128 

And when you do:
uisp -v=4 -dprog=stk500 -dserial=/dev/ttyS1 -dpart=atmega128 --upload 
if=rom.hex 

Thanks!






/**************************************************************************/
[bugs #11371] Full Item Snapshot:

URL: <http://savannah.nongnu.org/bugs/?func=detailitem&item_id=11371>
Project: AVR In-System Programmer
Submitted by: 0
On: Tue 12/21/2004 at 19:53

Category:  None
Severity:  5 - Average
Item Group:  None
Resolution:  None
Privacy:  Public
Assigned to:  None
Originator Email:  address@hidden
Status:  Open


Summary:  --verify hangs uisp ATMEGA128 

Original Submission:  when i try to verify an ATMEGA128, uisp responds with 
"Programmer is not responding" after a long delay.  i'm
using the stk500 board to program the MCU, and have had
much success in the past, though i haven't use the 128 
before.

i used the following command to produce the attached
file, which contains that standard error output with -v=4


# uisp -v=4 -dprog=stk500 -dserial=/dev/ttyS1 
> -dpart=atmega128 --upload --verify if=rom.hex 
> 2>uisp_stderr_v4.txt

(this question was originally posted in the wrong 
place... my appologies)



Follow-up Comments
------------------


-------------------------------------------------------
Date: Tue 12/28/2004 at 15:05       By: Margarita Manterola <marga>
Could you tell me what's the program's output when you do:
uisp -v=4 -dprog=stk500 -dserial=/dev/ttyS1

When you do:
uisp -v=4 -dprog=stk500 -dserial=/dev/ttyS1 -dpart=atmega128 

And when you do:
uisp -v=4 -dprog=stk500 -dserial=/dev/ttyS1 -dpart=atmega128 --upload 
if=rom.hex 

Thanks!

-------------------------------------------------------
Date: Tue 12/21/2004 at 19:56       By: 0 <None>
i made the mistake of updating the firmware on the stk500 board... it's 
currently v1.18.








File Attachments
-------------------

-------------------------------------------------------
Date: Tue 12/21/2004 at 19:53  Name: uisp_stderr_v4.txt  Size: 333B   By: None
verbose standard error
http://savannah.nongnu.org/bugs/download.php?item_id=11371&amp;item_file_id=1989






For detailed info, follow this link:
<http://savannah.nongnu.org/bugs/?func=detailitem&item_id=11371>

_______________________________________________
  Message sent via/by Savannah
  http://savannah.nongnu.org/