Re: [Uisp-dev] Programmer is not responding.

[E. Weddington]

Patrick Mahoney wrote:

> Greetings,
>
> I am unable to get any kind of interaction with my stk500 board with
> uisp... Here's the command line I used:
>
> $ uisp -dprog=stk500 -dserial=/dev/ttyS1 -dpart=ATmega163 -v=4 -erase
> Transmit: { 0 [30]   [20] }
> Programmer is not responding.
>
> I double checked the serial port and it is working. AvrStudio
> communicates without any problem. Here's the information it 
> gives me:
>
> Detecting on 'COM1'...
> STK500 with V2 firmware found on COM1
> Getting revisions.. HW: 0x02, SW Major: 0x02, SW Minor: 0x00 .. OK
>
> I am running out of ideas. Any help would be greatly appreciated.
>
>  
Did you try?: -dserial=/dev/com1