Please check with the lsusb command the device. It is an ICE3 which could have the old ttyUSB-interface or if it is
a newer one it uses the EDBG protocol which also leads to a different USB device identification. (Old ICE3 has two USB ports – one read, one write, new ones have more ports). In the later case you need to update the USB-configuration (look for udev rules)
to access it.
Knut
From: avr-chat-bounces+address@hidden [mailto:avr-chat-bounces+address@hidden
On Behalf Of Alexander Krause
Sent: Tuesday, January 06, 2015 1:05 AM
Cc: address@hidden
Subject: Re: [avr-chat] atmelice_isp and uploading arduino bootloader.
Thats group uucp afaik...
Am 5. Januar 2015 23:47:57 MEZ, schrieb Bob Cochran <address@hidden>:
Yes, perhaps one must be in the "lock" and/or "wheel" groups.
Hi,
MK II use pure USB interface for communication, so you need to be in usb group or something like that. But ICE and STK600 uses USB serial port (at least i saw it with FTDI chip). So just check if You in group for serial ports.
ls /dev/ttyUSB*
Martin
On 5 Jan 2015 22:57, "Andrew Chin" <address@hidden> wrote:
Here is the error when I say the programmer is "atmelice_isp"
avrdude: Version 6.0.1, compiled on Oct 26 2013 at 00:22:25
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/usr/share/arduino/hardware/tools/avrdude.conf"
User configuration file is "/home/test/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
avrdude: Can't find programmer id "atmelice_isp"
Here is the error when I put stk600
Using Programmer : stk600
avrdude: usbdev_open(): did not find any USB device "usb"
avrdude: Version 6.0.1, compiled on Oct 26 2013 at 00:22:25
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/usr/share/arduino/hardware/tools/avrdude.conf"
User configuration file is "/home/test/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Programmer : stk600
avrdude: usbdev_open(): did not find any USB device "usb"
I got this to work with the older MKII programmer, so i do not think it is a rights issue. What is the log file name. I do not see it.
On Mon, Jan 5, 2015 at 3:54 AM, Schwichtenberg, Knut <address@hidden> wrote:
Hi Andrew,
I guess you have insufficient access rights. Please provide the error message of the
command line. Please have a look to the messages file in /var/log for additional information.
Cheers,
Knut
I get a message that it cannot find the programmer.
That being said, I have no issues uploading regular code. I also tried inserting stk500v2 and stk600 as the programmer, but it did not like that also....
_______________________________________________
AVR-chat mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/avr-chat
AVR-chat mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/avr-chat
--
Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesendet.
|