Re: [avr-gcc-list] ATMega 103 and avr-gcc

[Christoph Plattner]

Hello !

I did the switch some months ago from 8515 to ATmega103, as my self
written OS
grows and grows...

The only problem is the fact, that ATmega103 has its down/up-load pins
on the
same as the serial interface, I need for the console.

But in all other respects, there was no change.
Yes there was one. My OS did not work on the ATmega. The problem was,
that the 
slower clock frequency (4MHz instead of 8, as ATmega supports 6MHz as
maximum),
did show up races in my OS....
Ok, this was only my software problem.

I wish you luck, and you can ask me...

        Christoph P.


Robert Rozman wrote:
> 
> Hello,
> 
> I'm thinking of switching from 8535 to ATMega103. I've successfully used
> avr-gcc on AVR smaller platforms and I wonder if it goes as smoothly as on
> nonMega devices.
> 
> Also, any positive or negative experience, opinion on ATMEga103 would
> be appreciated.
> 
> Thanks in advance,
> 
> Robert Rozman
> 
> _______________________________________________
> avr-gcc-list mailing list
> address@hidden
> http://avr.jpk.co.nz/mailman/listinfo/avr-gcc-list

-- 
-------------------------------------------------------------------------
private:        address@hidden
company:        address@hidden