Re: [avrdude-dev] new atmega168 device signature?

[Jason Pepas]

I tried it about 4 times over the course of half an hour last night.
I'll run it again a few times just to double check.

My programmer is a little bit hackish (I bought the spoke pov parallel
port interface before I realized there was a 10 pin and 6 pin ICSP
standard for the avr's, so I used some hookup wire to translate from
one to the other.  it took me a couple of times to get it working),
but it would seem odd that the same bit is off each time.

-jason

On 11/2/07, limor <address@hidden> wrote:
> its def a 168.
> are you getting -consistant- bad signature reads? it could be the
> programmer is wonky...
>
>   limor