Re: [Bug-xnee] Xnee with tcl/Tk based application

[Henrik Sandklef]

It was Xnee that was broken. In latest CVS I think it all should be working.

I tested it a bit and and it seems to be working.  Here's my command line:

    cnee --replay -f hesa.xns -mwm 327

This sets the number of move attempts to (you'll never be able to guess it!) 
327.

/hesa

On Thu, Mar 14, 2013 at 11:22:10PM +0100, Henrik Sandklef wrote:
> I am looking into it, but I figure I might have a broken X/RECORD on
> my laptop. Will try to check at work tomorrow.
> 
> New option to cnee:
> ---------------------------------------------
>   --max-window-moves,-mwm 
> 
>     Maximum times Xnee will try to move a window to the position it 
>     was in when recorded
> 
> 
> /h
> 
> If you want to try the new feature you can find nightly tar balls of
> the source code here every night:
> 
>   http://129.16.213.45/xnee-build/nightly-tar-ball/
> 
> Wait until there's a file from March 15.
> 
> 
> On Wed, Feb 27, 2013 at 11:35:28PM +0000, Bales, Garry wrote:
> > Hi Henrik,
> > 
> > Here is the ldd output for the frontend process.
> > 
> > 
> > vish | xargs ldd
> >         librt.so.1 => /lib64/tls/librt.so.1 (0x00000036faf00000)
> >         libpthread.so.0 => /lib64/tls/libpthread.so.0 (0x00000036f7400000)
> >         libXft.so.2 => /usr/X11R6/lib64/libXft.so.2 (0x00000036f8000000)
> >         libX11.so.6 => /usr/X11R6/lib64/libX11.so.6 (0x00000036f6700000)
> >         libdl.so.2 => /lib64/libdl.so.2 (0x00000036f6e00000)
> >         libXext.so.6 => /usr/X11R6/lib64/libXext.so.6 (0x00000036f7000000)
> >         libm.so.6 => /lib64/tls/libm.so.6 (0x00000036f6c00000)
> >         libncurses.so.5 => /usr/lib64/libncurses.so.5 (0x0000002a95586000)
> >         libc.so.6 => /lib64/tls/libc.so.6 (0x00000036f6900000)
> >         libfontconfig.so.1 => /usr/lib64/libfontconfig.so.1 
> > (0x00000036f8200000)
> >         /lib64/ld-linux-x86-64.so.2 (0x00000036f6500000)
> >         libXrender.so.1 => /usr/X11R6/lib64/libXrender.so.1 
> > (0x00000036f8400000)
> >         libexpat.so.0 => /usr/lib64/libexpat.so.0 (0x00000036f7c00000)
> >         libfreetype.so.6 => /usr/lib64/libfreetype.so.6 (0x00000036f7a00000)
> >         libz.so.1 => /usr/lib64/libz.so.1 (0x00000036f7200000)
> > 
> > 
> > Regards,
> > Garry B.
> > 
> > -----Original Message-----
> > From: Henrik Sandklef [mailto:address@hidden 
> > Sent: Wednesday, February 27, 2013 3:11 PM
> > To: Bales, Garry
> > Cc: address@hidden
> > Subject: Re: [Bug-xnee] Xnee with tcl/Tk based application
> > 
> > On Mon, Feb 25, 2013 at 05:48:49PM +0000, Bales, Garry wrote:
> > > Hi Henrik,
> > > 
> > > The application is invoked as vsim.   Let me check with my management and 
> > > see if we can get you a demo copy or something.
> > 
> > Ah, never mind. If it's not free software I am not interested.
> > 
> > Do you know what UI framework the program (vsim) is using? Sth like this 
> > will probably work:
> > 
> >     which vsim | xargs ldd
> > 
> > /h
> > 
> > 
> > > Regards,
> > > Garry B.
> > > 
> > > -----Original Message-----
> > > From: Henrik Sandklef [mailto:address@hidden
> > > Sent: Monday, February 25, 2013 6:48 AM
> > > To: Bales, Garry
> > > Cc: address@hidden
> > > Subject: Re: [Bug-xnee] Xnee with tcl/Tk based application
> > > 
> > > 
> > > What is the name of your program? 
> > > Easier to look into this if I know ... and it sure sounds interesting.
> > > 
> > > /h
> > > 
> > > On Fri, Feb 22, 2013 at 03:17:44PM +0000, Bales, Garry wrote:
> > > > Hi Henrik,
> > > > 
> > > > Thanks for the response.
> > > > 
> > > > I am recording and replay within the same xterm window session.  KDE is 
> > > > the manager.
> > > > The application does a very large amount of window creation and redraw 
> > > > just invoking.
> > > > The application attempts to place it windows in the same location every 
> > > > time.
> > > > 
> > > > Kind Regards,
> > > > Garry B.
> > > > 
> > > > -----Original Message-----
> > > > From: Henrik Sandklef [mailto:address@hidden
> > > > Sent: Friday, February 22, 2013 2:14 AM
> > > > To: Bales, Garry
> > > > Cc: address@hidden
> > > > Subject: Re: [Bug-xnee] Xnee with tcl/Tk based application
> > > > 
> > > > On Fri, Feb 15, 2013 at 10:25:18PM +0000, Bales, Garry wrote:
> > > > > Hi Henrik,
> > > > > 
> > > > > I am trying to test an EDA simulation tool with Xnee,
> > > > 
> > > > nice
> > > > 
> > > > > cnee.
> > > > > However prior to even windows being drawn I get a ton of the 
> > > > > following messages:
> > > > > 
> > > > > Xnee error
> > > > > Description: Fatal error while adjusting window position
> > > > > Solution:       Xnee could not adjust window position. Report the 
> > > > > problem
> > > > 
> > > > When replaying a session Xnee is trying to move the window to the same 
> > > > position as it was in when recorded. The reasons behind this is that we 
> > > > didn't want to think about where focus is and what window is hidden by 
> > > > the new position. If Xnee can't, for some reason, move a window to the 
> > > > "same" position it bails out.
> > > > 
> > > > This feature has been untouched for a while so no need to try out 
> > > > different versions.
> > > > 
> > > > Are you recording and replaying to the same computer setup?
> > > > What window manager are you using?
> > > > 
> > > > /h
> > > > 
> > > > > .
> > > > > .
> > > > > .
> > > > > 
> > > > > I have created a human readable record session and attached it to 
> > > > > this email.
> > > > > 
> > > > > I have trying several options but none of them seem to make a 
> > > > > difference.
> > > > > 
> > > > > Any suggestions or work arounds?
> > > > > 
> > > > > I have tried both 3.14 an 3.15 versions of the Xnee tools.
> > > > > 
> > > > > Regards,
> > > > > 
> > > > > Garry W. Bales
> > > > > 
> > > > > [cid:image001.jpg@01CE0B88.03B626D0]
> > > > > 
> > > > 
> > > > 
> > > > 
> > > > > BEGIN:VCARD
> > > > > VERSION:2.1
> > > > > X-MS-SIGNATURE:YES
> > > > > N;LANGUAGE=en-us:Bales;Garry;W.
> > > > > FN:Garry W. Bales
> > > > > ORG:Mentor Graphics;MED
> > > > > TITLE:Manager Infrastructure Questa Codelink
> > > > > TEL;WORK;VOICE:8213-1558
> > > > > TEL;HOME;VOICE:(503) 691-8955
> > > > > TEL;CELL;VOICE:(503) 869-2229
> > > > > ADR;WORK;PREF:;;8005 SW Boeckman
> > > > > Road;Wilsonville;OR;97070-7777;United
> > > > > States of America
> > > > > LABEL;WORK;PREF;ENCODING=QUOTED-PRINTABLE:8005 SW Boeckman 
> > > > > Road=0D=0A= Wilsonville, OR 97070-7777
> > > > > X-MS-OL-DEFAULT-POSTAL-ADDRESS:2
> > > > > EMAIL;PREF;INTERNET:address@hidden
> > > > > EMAIL;INTERNET:address@hidden
> > > > > X-MS-OL-DESIGN;CHARSET=utf-8:<card
> > > > > xmlns="http://schemas.microsoft.com/office/outlook/12/electronicbu
> > > > > si ne sscards" ver="1.0" layout="left" bgcolor="ffffff"><img 
> > > > > xmlns=""
> > > > > align="fit" area="16" use="cardpicture"/><fld xmlns="" prop="name" 
> > > > > align="left" dir="ltr" style="b" color="000000" size="10"/><fld 
> > > > > xmlns="" prop="org" align="left" dir="ltr" color="000000"
> > > > > size="8"/><fld xmlns="" prop="title" align="left" dir="ltr" 
> > > > > color="000000" size="8"/><fld xmlns="" prop="dept" align="left" 
> > > > > dir="ltr" color="000000" size="8"/><fld xmlns="" prop="telwork" 
> > > > > align="left" dir="ltr" color="000000" size="8"><label align="right" 
> > > > > color="626262">Work</label></fld><fld xmlns="" prop="telcell" 
> > > > > align="left" dir="ltr" color="000000" size="8"><label align="right" 
> > > > > color="626262">Mobile</label></fld><fld xmlns="" prop="telhome" 
> > > > > align="left" dir="ltr" color="000000" size="8"><label align="right" 
> > > > > color="626262">Home</label></fld><fld xmlns="" prop="email" 
> > > > > align="left" dir="ltr" color="000000" size="8"/><fld xmlns="" 
> > > > > prop="email2" align="left" dir="ltr" color="000000" size="8"/><fld 
> > > > > xmlns="" prop="addrwork" align="left" dir="ltr" color="000000"
> > > > > size="8"/><fld xmlns="" prop="blank" size="8"/><fld xmlns="" 
> > > > > prop="blank" size="8"/><fld xmlns="" prop="blank" size="8"/><fld 
> > > > > xmlns="" prop="blank" size="8"/><fld xmlns="" prop="blank"
> > > > > size="8"/><fld xmlns="" prop="blank" size="8"/></card> 
> > > > > REV:20120918T230837Z END:VCARD
> > > > 
> > > > 
> > > > > _______________________________________________
> > > > > Bug-xnee mailing list
> > > > > address@hidden
> > > > > https://lists.gnu.org/mailman/listinfo/bug-xnee
> > > > 
> > > > 
> > > > _______________________________________________
> > > > Bug-xnee mailing list
> > > > address@hidden
> > > > https://lists.gnu.org/mailman/listinfo/bug-xnee
> > > > 
> > > 
> > 
> > _______________________________________________
> > Bug-xnee mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/bug-xnee
> > 
> 
> _______________________________________________
> Bug-xnee mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/bug-xnee
>