Re: [Denemo-devel] Building with Gtk 3.22

[Richard Shann]

On Mon, 2017-01-16 at 08:31 +0100, Andreas Schneider wrote:
> Am 15.01.2017 um 20:51 schrieb Richard Shann:
> > On Sun, 2017-01-15 at 19:18 +0100, Andreas Schneider wrote:
> >> Am 15.01.2017 um 18:51 schrieb Richard Shann:
> >>> On Sun, 2017-01-15 at 18:07 +0100, Andreas Schneider wrote:
> >>>> I have
> >>>> pulled the latest git and built it, but the only output I get is
> >>>> Denemo - WARNING : Attaching timings to objects failed
> >>>> when selecting the playback view,
> >>>
> >>> ah, I didn't know you had this message, the failure is happening earlier
> >>> then. I've added debug output earlier to try and trace where it is going
> >>> wrong - can you pull and re-test?
> >>
> >> The output is:
> >>
> >> Output to /tmp/Denemo_DR75TY/denemoprintB.svg num_pages starts at 0
> >> Collected 8 ids
> >> Denemo - WARNING : Attaching timings to objects failed
> >>
> >> I have attached the lilypond, SVG and events files from /tmp/Denemo_DR75TY.
> > 
> > Thanks, I've added even more debug - it would seem to be failing to
> > parse events.txt properly. Can you report on the output now.
> 
> This is what I get:
> 
> Output to /tmp/Denemo_FC8VTY/denemoprintB.svg num_pages starts at 0
> Collected 8 ids
> moment 0,00 .00000000 latestMoment 0,00

aaargh! I suspect the commas 0,00 instead of 0.00

In the denemorc file I always avoid storing floating point numbers for
this reason. I'll look into this later...

Richard

> Finished collecting timingsDenemo - WARNING : Attaching timings to
> objects failed
> 
> Andreas