[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] LED blinking
From: |
Rahul Dhar |
Subject: |
Re: [Discuss-gnuradio] LED blinking |
Date: |
Thu, 17 Feb 2005 14:01:42 -0500 |
User-agent: |
Mutt/1.4i |
On Wed, Feb 16, 2005 at 04:06:20PM -0800, Matt Ettus wrote:
>
>
>
>> Can I use any wire, or is there a specific gauge, etc., that I need to
>> look for?
>
>
> Any wire that can handle 3 amps.
I'm not very well-versed with wiring, but from a bit of googling, it
seems that 16 AWG wire should do. Is this correct?
http://www.supersoft.sk/hardware/ta_AWG.asp gives the following:
Gauge Diam Area R I at 3A/mm2
AWG mm mm2 ohm/km mA
16 1,30 1,3 13,0 3,97 A
1,40 1,5 11,2 4,60 A
1,50 1,8 9,70 5,30 A
-Rahul
--
Rahul Dhar
address@hidden
Actually, my goal is to have a sandwich named after me.
pgpaFQEVmHtpF.pgp
Description: PGP signature
- [Discuss-gnuradio] LED blinking, Rahul Dhar, 2005/02/15
- Re: [Discuss-gnuradio] LED blinking, Eric Blossom, 2005/02/15
- Re: [Discuss-gnuradio] LED blinking, Rahul Dhar, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking, Eric Blossom, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking, Matt Ettus, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking, Rahul Dhar, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking, Matt Ettus, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking, Pat Crean, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking,
Rahul Dhar <=
- Re: [Discuss-gnuradio] LED blinking, Eric Blossom, 2005/02/17
- Re: [Discuss-gnuradio] LED blinking, Rahul Dhar, 2005/02/17