[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] LED blinking
From: |
Eric Blossom |
Subject: |
Re: [Discuss-gnuradio] LED blinking |
Date: |
Thu, 17 Feb 2005 12:30:48 -0800 |
User-agent: |
Mutt/1.5.6i |
On Thu, Feb 17, 2005 at 02:01:42PM -0500, Rahul Dhar wrote:
> On Wed, Feb 16, 2005 at 04:06:20PM -0800, Matt Ettus wrote:
> >
> >> Can I use any wire, or is there a specific gauge, etc., that I need to
> >> look for?
>
> > Any wire that can handle 3 amps.
>
> I'm not very well-versed with wiring, but from a bit of googling, it
> seems that 16 AWG wire should do. Is this correct?
> http://www.supersoft.sk/hardware/ta_AWG.asp gives the following:
> Gauge Diam Area R I at 3A/mm2
> AWG mm mm2 ohm/km mA
> 16 1,30 1,3 13,0 3,97 A
> 1,40 1,5 11,2 4,60 A
> 1,50 1,8 9,70 5,30 A
>
16 gauge sounds like overkill. Try something like 20 or 24, or
whatever you've got ;-)
Eric
- [Discuss-gnuradio] LED blinking, Rahul Dhar, 2005/02/15
- Re: [Discuss-gnuradio] LED blinking, Eric Blossom, 2005/02/15
- Re: [Discuss-gnuradio] LED blinking, Rahul Dhar, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking, Eric Blossom, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking, Matt Ettus, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking, Rahul Dhar, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking, Matt Ettus, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking, Pat Crean, 2005/02/16
- Re: [Discuss-gnuradio] LED blinking, Rahul Dhar, 2005/02/17
- Re: [Discuss-gnuradio] LED blinking,
Eric Blossom <=
- Re: [Discuss-gnuradio] LED blinking, Rahul Dhar, 2005/02/17