|
From: | Martin Dvh |
Subject: | Re: [Discuss-gnuradio] Where is the output enabled of rx reference clock for dbsrx |
Date: | Tue, 25 Oct 2005 05:39:37 +0200 |
User-agent: | Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.5b) Gecko/20030823 |
John Gilmore wrote:
The eeprom on the daughterboard determines which wires from the FPGA to the board are outputs and which are inputs. This is key because if you get it wrong, you fry the board with two chips driving the line in opposite directions. So if you have a modified dbsrx board that wants some extra signal from the FPGA, you have to reburn its EPROM to say so.
Yes I thought that was the idea. But what I don't understand that in the eprom of the dbsrx board no outputs are enabled while I know for sure io[0] is used as an output for the reference clock to the dbsrx daughterboard. Greetings, Martin
[Prev in Thread] | Current Thread | [Next in Thread] |