[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Simultaneous TX/RX Sample Code for RFX (FLEX) 400
From: |
Martin Dvh |
Subject: |
Re: [Discuss-gnuradio] Simultaneous TX/RX Sample Code for RFX (FLEX) 400 |
Date: |
Tue, 23 May 2006 12:39:47 +0200 |
User-agent: |
Debian Thunderbird 1.0.2 (X11/20060423) |
Matt Ettus wrote:
>>>Although I am aware that the signal will need to be attenuated severely, I
>>>am unsure what the RF front end of the RFX-400 is spec'd for. With a 20 dBm
>>>signal at the TX, I am planning to use anywhere from 40 to 60 dB of
>>>attenuation. I believe this will give me a -20 to -40 dBm signal at RX2.
>>>This should be acceptable, right? Thanks again for your help, it is much
>>>appreciated.
>
>
> There is enough leakage between the TX and RX side that you won't need
> to connect them at all. Just put a dummy load on the TX side. The
> TX/RX switch has about 35 dB of isolation. You may get some extra
> isolation by setting the RX input to RX2 and putting another dummy load
> there.
>
> You can also lower the TX power.
I thought the TX power allways had to be at maximum for the RFX boards.
greetings,
Martin
>
> Matt
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>