[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] "check topology failed"
From: |
meggahertz |
Subject: |
Re: [Discuss-gnuradio] "check topology failed" |
Date: |
Sun, 10 Feb 2008 15:32:03 -0500 |
Thank you for your help Johnathan. Looks like I figured out the issue with Alsa
and opened the channels using alsamixer. I was choosing the wrong hardware and
now I am using hw:00,04 which seems to work with sampling rate 44.1K.
command line: sudo ./tx_voice.py -f 991e5 -v -I hw:00,04 -M 1
I now get this on the terminal:
gr_fir_fff: using SSE
bits per symbol = 1
Gaussian filter bt = 0.35
Using TX d'board A: Basic Tx
Tx amplitude 12000
modulation: gmsk_mod
bitrate: 50kb/s
samples/symbol: 5
interp: 512
Tx Frequency: 99.1M
gr_buffer::allocate_buffer: warning: tried to allocate
992 items of size 33. Due to alignment requirements
4096 were allocated. If this isn't OK, consider padding
your structure to a power-of-two bytes.
On this platform, our allocation granularity is 4096 bytes.
aO...............................................................
.................................................................
.................................................................
.................................................................
.................................................................
............................................
What I am trying to do now is to transmit whatever I play on the computer
(songs) and receive it on a regular FM radio in the room. I see a pulse at the
99.1M frequency using the usrp_fft.py how ever I cannot hear anything on the
radio. Could you please give me some guidance on that.
Thanks a bunch!
--
This message was sent on behalf of address@hidden at openSubscriber.com
http://www.opensubscriber.com/message/address@hidden/8573763.html