|
| From: | William Sherman |
| Subject: | [Discuss-gnuradio] Re: xcvr2450, v3.2 and usrp1 |
| Date: | Wed, 17 Jun 2009 07:12:08 +0200 |
Here is my console output for a transmit program: The XCVR2450 doesn't transmit. python rx2_pu_tx.py -f 2.4G xcvr2450: Setting reg 2 to 30072 xcvr2450: Setting reg 5 to 38225 xcvr2450: Setting reg 5 to 38A25 xcvr2450: Setting reg 6 to 4006 xcvr2450: Setting reg 7 to 627 xcvr2450: Setting reg 8 to 1C218 xcvr2450: Setting reg 9 to 68B9 xcvr2450: Setting reg 10 to 3C0A xcvr2450: Setting reg 11 to 10B xcvr2450: Setting reg 12 to 3FC xcvr2450: Setting reg 3 to 963 xcvr2450: Setting reg 4 to 4 xcvr2450: Setting reg 5 to 38225 xcvr2450: Setting reg 5 to 38A25 tx tune result: baseband freq: 2400000000.000000 dxc freq: -0.000000 residual freq: -0.000000 >>> gr_fir_ccf: using SSE xcvr2450: Setting reg 12 to 3FC modulation: dbpsk Channel freq: 2.4G RX/TX bitrate: 250kb/sec samples/symbol: 2 TX interp: 256 original_payload = 01:01:01 uUuUuU^Z Suspended -- Posted via http://www.ruby-forum.com/.
| [Prev in Thread] | Current Thread | [Next in Thread] |