schrieb naveen nischal am 2010-06-04 23:49:
Hi,
I have recently got into doing the SDR, i have been using the both the
tvrx and wbx daughter boards for communicating with the ham radio at
435.300Mhz. I am not too good at python so i use GRC. However when i try
to receive from the voice from the AO-51 satellite at the same 435.3Mhz
frequency i dont get anything. Any comments or suggestions are
appreciated.
Please take a look at
http://www.amsat.org/amsat-new/satellites/status.php
AO51 seems to work as a repeater/transverter, it never resends the input
at the same frequency/band. Very common is to have the uplink on 2m=145MHz
and the downlink on 70cm=435MHz. This is called V/U-mode. You can find
details and the current status at the link above.
Please also take Doppler shift into account, this is not big show-stopper
at FM, but be prepared to retune sometimes. You will see the Doppler shift
if you use a waterfall display.
The easiest to start is to listen first. It's very probable that you will
hear some conversation during a pass.
Patrick
--
Engineers motto: cheap, good, fast: choose any two
QTH: JN77rb
Patrick Strasser OE6PSE <oe6pse at wirklich priv at>
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio