Re: [Discuss-gnuradio] Need help in emergency for the fpga image

[Gabriel Morel]

I'm using ISE 12.1 on windows, not on linux, is it different?  I think is 
different for the method of calling command, not on the result.  The bin 
file is suppose to be the same on linux or on windows, no?

Gab

----- Original Message ----- 
From: "Nick Foster" <address@hidden>
To: "Gabriel Morel" <address@hidden>
Cc: <address@hidden>
Sent: Wednesday, January 05, 2011 2:55 PM
Subject: Re: [Discuss-gnuradio] Need help in emergency for the fpga image


> Thanks for the info. Try the following to compile it using the makefile
> we include in the distro.
>
> In order to do this you'll have to have the ISE12 settings exported in
> your shell. You can do this by running:
>
> source /opt/Xilinx/12.1/ISE_DS/settings32.sh  *OR*
> source /opt/Xilinx/12.1/ISE_DS/settings64.sh
>
> depending on if you're running a 32-bit or 64-bit system.
>
> Then cd to the usrp2/top/u2_rev3 directory of the fpga repository and
> run:
>
> make bin
>
> The bin file will be in the subdirectory build-ISE?? where ?? is the
> version of ISE you use. So for 12.1 it will be at
> build-ISE12/u2_rev3.bin.
>
> Let me know if that FPGA file works for you and we can work from there.
>
> --n
>
> On Wed, 2011-01-05 at 14:32 -0500, Gabriel Morel wrote:
> > ----- Original Message ----- 
> > From: "Nick Foster" <address@hidden>
> > To: "Gabriel Morel" <address@hidden>
> > Sent: Tuesday, January 04, 2011 1:48 PM
> > Subject: Re: [Discuss-gnuradio] Need help in emergency for the fpga image
> >
> >
> > >I asked you a bunch of questions you didn't answer the last time you
> > > posted. I can't help you unless you give me more details. Can you 
> > > answer
> > > these questions for me?
> > >
> > > 1. Are you planning on using the older raw socket interface or UHD to
> > > communicate with your USRP2?
> >
> >     I use the raw ethernet version.
> >
> > > 2. Are you using the original SD card that came with your USRP2?
> >
> >     yes I'm using a SD card that came with my USRP2
> >
> > > 3. Does re-loading the original downloaded FPGA bin image onto the same
> > > SD card make it work for you?
> >
> >     Yes
> >
> > > 4. What specific firmware file (including full file name) are you
> > > loading onto the SD card?
> >
> >     I'm using the WBX daughter board with the fpga bin file
> >     u2_rev3-20100603.bin
> >     and the firmware
> >     txrx_wbx_raw_eth_20100608.bin
> >     It is working when both file are loaded together
> >
> >
> > > 5. Are you using "make bin" or "make -f Makefile.udp bin" to compile
> > > your image?
> >
> >      No, I created a project with the FPGA xc3s200fg456-5 in ISE 12.1 and 
> > I
> > added all the files of all differents
> >     makefile of all folder of the principal makefile in
> > fpga/usrp2/top/u2_rev3.  I implemented the top module and I
> >     generated the programming file by double clicking on the command in 
> > the
> > design tab.
> >
> > > 6. Are you using the master branch or the ise12 branch of the Git
> > > repository?
> >
> >     I think i used the master branch.  I downloaded all the files in
> > repository fpga.git and used the u2_rev3.v top in fpga/usrp2/top/u2_rev3.
> >
> > > --n
> > >
> > > On Tue, 2011-01-04 at 13:29 -0500, Gabriel Morel wrote:
> > >> Hello everyone, I must find a way to compile the FPGA project for the
> > >> USRP2 to continue my Masters. I use ISE 12.1
> > >> and the top project u2_rev3 in
> > >> the repository git://ettus.sourcerepo.com/ettus/fpga.git using all
> > >> the files in different makefile.
> > >> The compilation works well and I get the bin file of 842Kb. But during
> > >> the test, only one of the lights glow
> > >> and the computer does not see the radio.  Is there someone who
> > >> can reproduce this bug and help me find
> > >> an answer?
> > >>
> > >> Gabriel
> > >> _______________________________________________
> > >> Discuss-gnuradio mailing list
> > >> address@hidden
> > >> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> > >
> > >
> >
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio