Re: [Discuss-gnuradio] Need help in emergency for the fpga image

[Gabriel Morel]

----- Original Message ----- 
From: "Nick Foster" <address@hidden>
To: "Gabriel Morel" <address@hidden>
Sent: Tuesday, January 04, 2011 1:48 PM
Subject: Re: [Discuss-gnuradio] Need help in emergency for the fpga image


> I asked you a bunch of questions you didn't answer the last time you
> posted. I can't help you unless you give me more details. Can you answer
> these questions for me?
>
> 1. Are you planning on using the older raw socket interface or UHD to
> communicate with your USRP2?

   I use the raw ethernet version.

> 2. Are you using the original SD card that came with your USRP2?

   yes I'm using a SD card that came with my USRP2

> 3. Does re-loading the original downloaded FPGA bin image onto the same
> SD card make it work for you?

   Yes

> 4. What specific firmware file (including full file name) are you
> loading onto the SD card?

   I'm using the WBX daughter board with the fpga bin file
   u2_rev3-20100603.bin
   and the firmware
   txrx_wbx_raw_eth_20100608.bin
   It is working when both file are loaded together


> 5. Are you using "make bin" or "make -f Makefile.udp bin" to compile
> your image?

    No, I created a project with the FPGA xc3s200fg456-5 in ISE 12.1 and I 
added all the files of all differents
   makefile of all folder of the principal makefile in 
fpga/usrp2/top/u2_rev3.  I implemented the top module and I
   generated the programming file by double clicking on the command in the 
design tab.

> 6. Are you using the master branch or the ise12 branch of the Git
> repository?

   I think i used the master branch.  I downloaded all the files in 
repository fpga.git and used the u2_rev3.v top in fpga/usrp2/top/u2_rev3.

> --n
>
> On Tue, 2011-01-04 at 13:29 -0500, Gabriel Morel wrote:
> > Hello everyone, I must find a way to compile the FPGA project for the
> > USRP2 to continue my Masters. I use ISE 12.1
> > and the top project u2_rev3 in
> > the repository git://ettus.sourcerepo.com/ettus/fpga.git using all
> > the files in different makefile.
> > The compilation works well and I get the bin file of 842Kb. But during
> > the test, only one of the lights glow
> > and the computer does not see the radio.  Is there someone who
> > can reproduce this bug and help me find
> > an answer?
> >
> > Gabriel
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio