discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Discuss-gnuradio] Introducing Wideband RF Transceiver Board U-RFX c


From: Per Zetterberg
Subject: RE: [Discuss-gnuradio] Introducing Wideband RF Transceiver Board U-RFX covering frequencies from 1MHz to 4.4GHz
Date: Wed, 2 Feb 2011 08:30:12 +0000

Sounds very interesting.

What is the phase-noise spec ?
How do you define receiver sensitivity? . It's strange that receiver 
sensitivity varies 20dB and noise figure 2dB.
What is your compatibility with UHD?

BR/
Per


________________________________________
From: address@hidden address@hidden on behalf of address@hidden address@hidden
Sent: Wednesday, February 02, 2011 5:07 AM
To: address@hidden
Subject: [Discuss-gnuradio] Introducing Wideband RF Transceiver Board U-RFX 
covering frequencies from 1MHz to 4.4GHz

Agile Solutions is pleased to announce a new Wideband RF Transceiver board 
U-RFX capable of tuning frequencies from 1MHz to 4.4GHz.



The wide frequency coverage addresses the need for single RF transceiver board 
capable of meeting various application needs ranging from 1MHz to 4.4GHz with 
50 MHz of RF Bandwidth.

Agile Solutions is Startup Company Started in 2010 with goal to produce low 
cost software Defined Radio Solutions for Teaching, Research and Prototype 
Solutions.

Our first Universal RF Transceiver board U-RFX is developed to address GNURADIO 
and USRP.

U-RFX board seamlessly works with USRP family of boards.

U-RFX is Full duplex RF Tranceiver board and operates in two modes

          Low Frequency Operation: 1MHz to 200MHz, same as Basic TX and Basic RX
          High Frequency Operation: 200MHz to 4.4GHz
                          MAX RF Output Power: 17dBm with upto 25dB Output 
power control
                          MAX RF Input Power:  -15dBm with upto 45dB gain 
control
                          Receiver Sensitivity: -115dBm upto 3.8GHz and -95dBm 
upto 4.4GHz
                          Receiver Noise figure: 6-8 dB

U-RFX is MIMO capable:All the LO's on U-RFX board are phase synchronous with 
respect to motherboard clock. By using two or more U-RFX boards, NxM MIMO can 
be realized.

U-RFX board is available for purchase at an introductory price of 700 USD.

Universal RF Tranceiver board U-RFX is designed with Zero IF direct conversion 
architecture and has onboard Local Oscillators, Mixers, Switches, LNA's and 
Power amplifiers.


For more information on U-RFX, please visit www.agile-sdr-solutions.com

Regards
Agile Solutions




reply via email to

[Prev in Thread] Current Thread [Next in Thread]