[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] GRC + USRP2 + WBFM: synchronization problem?
From: |
Nick Foster |
Subject: |
Re: [Discuss-gnuradio] GRC + USRP2 + WBFM: synchronization problem? |
Date: |
Sun, 03 Apr 2011 14:16:45 -0700 |
On Sun, 2011-04-03 at 08:48 +0200, Marcin Szelest wrote:
> Hello again,
>
>
> I've fixed sampling rate for 19kHz subcarier, but problem still existed.
>
> I found that throttle connected between WBFM and USRP2 makes situation better.
> Now I have better quality, but some disortions are still audible.
This is a really good indication that your sample rates are off
somewhere. The throttle block should never be used when a hardware
interface is involved. Check your sample rate conversions.
--n
>
>
> Regards,
> Marcin
>
>
> 2011/3/30 Ed Criscuolo <address@hidden>:
> > Looks like you have your interpolator and your multiply blocks switched.
> >
> > The way you have it, the L-R audio is interpolated up to a 200k
> > sample rate, and then multiplied with a 19khz subcarrier at
> > a 44.1k sample rate.
> >
> > Do the multiply first, then interpolate the product.
> >
> > Or alternately, simply change the 19 kHz sample rate to 200k.
> >
> > @(^.^)@ Ed
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio