[Discuss-gnuradio] SBX Transceiver DBoard Now Available

[Matt Ettus]

=========================================================================

Ettus Research is proud to announce that the SBX transceiver
daughterboard is now available for purchase.  The SBX has the following
performance characteristics:

 - 400 MHz to 4.4 GHz frequency coverage
 - +16 to +20 dBm TX output power, with 32dB of power control range
 - 0 dBm IIP3 on Receive
 - 5-7 dB NF below 3 GHz, 7-10 dB NF between 3 and 4 GHz, 10-13 dB NF
between 4 and 4.4 GHz.
 - Full duplex capable
 - Fully supported by the UHD driver system
 - Works with the entire USRP family (*)


(*) USRP1 systems with serial number lower than 500 will need a
modification to work with the SBX.  All other USRP1, USRP2, N200, N210,
E100, and E110 systems will work without modification, as long as you
are using the UHD drivers.

You can see a picture of the SBX here:

        http://www.ettus.com/images/SBX.JPG

The SBX costs $475 and can be purchased from our Orders web page:

        http://www.ettus.com/order

=========================================================================

Matt Ettus
President, Ettus Research LLC