Re: [Discuss-gnuradio] Warning! Warning!

[Mike Jameson]

Hi,

I have just run the attached script on an Ubuntu 10.04.4_x64 LTS system to seamlessly install the latest UHD and Gnu Radio builds.

As you can see from the output of 'uhd_usrp_probe' below, the TVRX rev1 in RX Dboard B is still not UHD compatible.

Would it be possible to indicate an ETA for when the UHD will be compatible with the very first 50 to 800Mhz receiver in the Ettus Research product range?

Thanks,

Mike
M0MIK



address@hidden:~$ uhd_find_devices 

linux; GNU C++ version 4.4.3; Boost_104000; UHD_003.004.000-3ddbcb6

--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:

    type: usrp1
    name: 
    serial: 00000000


address@hidden:~$ uhd_usrp_probe
linux; GNU C++ version 4.4.3; Boost_104000; UHD_003.004.000-3ddbcb6

-- Opening a USRP1 device...
-- Loading FPGA image: /usr/local/share/uhd/images/usrp1_fpga.rbf... done

-- Using FPGA clock rate of 64.000000MHz...
  _____________________________________________________
 /
|       Device: USRP1 Device
|     _____________________________________________________
|    /
|   |       Mboard: USRP1 (Classic)

|   |   
|   |   Time sources: none
|   |   Clock sources: internal
|   |   Sensors: 
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 0
|   |   |   Freq range: -32.000 to 32.000 Mhz

|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 1
|   |   |   Freq range: -32.000 to 32.000 Mhz
|   |     _____________________________________________________

|   |    /
|   |   |       RX Dboard: A
|   |   |   ID: DBSRX (0x0002)
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Subdev: 0
|   |   |   |   Name: DBSRX (0x0002)

|   |   |   |   Antennas: J3
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 800.000 to 2400.000 Mhz
|   |   |   |   Gain range GC1: 0.0 to 56.0 step 0.5 dB
|   |   |   |   Gain range GC2: 0.0 to 24.0 step 1.0 dB

|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: A
|   |   |   |   Name: ad9522

|   |   |   |   Gain range pga: 0.0 to 20.0 step 1.0 dB
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: B
|   |   |   ID: Unknown (0x0003)
|   |   |     _____________________________________________________

|   |   |    /
|   |   |   |       RX Subdev: 0
|   |   |   |   Name: Unknown (0x0003) - 0
|   |   |   |   Antennas: 
|   |   |   |   Sensors: 
|   |   |   |   Freq range: 0.000 to 0.000 Mhz
|   |   |   |   Gain Elements: None

|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: B
|   |   |   |   Name: ad9522

|   |   |   |   Gain range pga: 0.0 to 20.0 step 1.0 dB
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: 0
|   |   |   Freq range: -44.000 to 44.000 Mhz
|   |     _____________________________________________________

|   |    /
|   |   |       TX DSP: 1
|   |   |   Freq range: -44.000 to 44.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: A
|   |   |     _____________________________________________________

|   |   |    /
|   |   |   |       TX Subdev: 0
|   |   |   |   Name: Unknown (0xffff) - 0
|   |   |   |   Antennas: 
|   |   |   |   Sensors: 
|   |   |   |   Freq range: 0.000 to 0.000 Mhz
|   |   |   |   Gain Elements: None

|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: A
|   |   |   |   Name: ad9522

|   |   |   |   Gain range pga: -20.0 to 0.0 step 0.1 dB
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: B
|   |   |     _____________________________________________________

|   |   |    /
|   |   |   |       TX Subdev: 0
|   |   |   |   Name: Unknown (0xffff) - 0
|   |   |   |   Antennas: 
|   |   |   |   Sensors: 
|   |   |   |   Freq range: 0.000 to 0.000 Mhz
|   |   |   |   Gain Elements: None

|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: B
|   |   |   |   Name: ad9522

|   |   |   |   Gain range pga: -20.0 to 0.0 step 0.1 dB

On 7 November 2011 23:59, Patrik Tast <address@hidden> wrote:

Add 4 more dinosaurs to the list who use those and trad GR ;)


Patrik
----- Original Message ----- From: "Nick Foster" <address@hidden>
To: <address@hidden>
Cc: "Matt Ettus" <address@hidden>; <address@hidden>; <address@hidden>
Sent: Tuesday, November 08, 2011 1:48

Subject: Re: [Discuss-gnuradio] Warning! Warning!


On Mon, Nov 7, 2011 at 3:38 PM, Mike Jameson <address@hidden> wrote:

Hi,

Achilleas is right about the UHD not supporting all Ettus products just yet.
I also have an original TVRX rev1 from the USRP1 Serial < 500 days (all
still running fantastically btw) and it doesn't work with the UHD. As you
are now migrating everything to the UHD and discontinuing the old code,
would it be possible to request that you add TVRX Rev1 UHD support to your
things to do list?

OK, I guess I was wrong before about nobody still using those
daughterboards. I'll put "ancient TVRX support" on the todo list for
UHD.

--n

Thanks,

Mike

On Oct 21, 2011 2:40 AM, "Achilleas Anastasopoulos" <address@hidden>
wrote:

> All USRP daughterboards are supported in UHD. You should have no
> problems
> with DBSRX and BasicRX.
>
> Tom

I think this is not entirely true:

I have a TVRX that is not recognised by the uhd driver...

Achilleas




================================
Message: 6
Date: Thu, 20 Oct 2011 09:46:22 -0700
From: Tom Rondeau <address@hidden>
To: Mark Cetilia <address@hidden>
Cc: GNURadio Discussion List <address@hidden>
Subject: Re: [Discuss-gnuradio] Warning! Warning!
Message-ID:
<CANc0s2M6sNH3SHdq9TsKXYojJTCaOWYDEE6bHnJ_VYYrd=address@hiddengmail.com>
Content-Type: text/plain; charset="windows-1252"

On Thu, Oct 20, 2011 at 8:58 AM, Mark Cetilia <address@hidden> wrote:

> What does this mean in terms of using older non-UHD-native
> daughterboards
> such as the DBSRX & BasicRX?
> To be honest, I haven't checked into the UHD driver, since the
> daughterboards I have been working fine without it?
>
> Best,
> Mark



All USRP daughterboards are supported in UHD. You should have no problems
with DBSRX and BasicRX.

Tom

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

build-gnuradio
Description: Binary data