|
From: | Karan Talasila |
Subject: | Re: [Discuss-gnuradio] samples _per_symbol parameter |
Date: | Tue, 3 Dec 2013 17:27:22 +0530 |
Hi karan ,Thanks for reply .well ya in gnuradio also if i set the value of samples/symbol below 2 it is throwing me an error .So is there any specific reason behind using the value greater than 2?and is that higher the value of samples/second the smoother will be the waveform? please correct me if i'am wrong .ThanksSandhyaOn Tue, Dec 3, 2013 at 4:28 PM, Karan Talasila <address@hidden> wrote:Hi,Bits/symbol depends on modulation scheme that you use to transmit. For BPSK, it is 1 bit/symbol, for QPSK it is 2 bit/symbol and for 64-QAM it is 6 bits/symbol. So you can set it according to modulation scheme you use.Samples/symbol is normally default set to 2. I am not aware in gnuradio but in certain other implementations samples/symbol is kept greater than 2, say 4 or 8 to account for pulse shaping.On Tue, Dec 3, 2013 at 2:33 PM, Sandhya G <address@hidden> wrote:
_______________________________________________SandhyaThankssamples/symbol=(samples/second)/(symbols/second).Can anyone tell me how do i calculate samples/symbol .I know the traditional formulaHi everyone,i'am trying to do simply QAM modulation for that the source i used is vector source which gives 1byte of 1's and 0's which is fed to QAM modulator .
symbols/sec= (Bits/sec)/(Bits/symbol)I having the problem to decide bits/symbol and bits/sec.Please help me
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
--
Regards
Karan Talasila
[Prev in Thread] | Current Thread | [Next in Thread] |