[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] trouble with gr_multiply_const_ff
From: |
atools_cook |
Subject: |
Re: [Discuss-gnuradio] trouble with gr_multiply_const_ff |
Date: |
Tue, 3 Dec 2013 23:38:34 -0800 (PST) |
lan
I have done some research work. The input values of uhd should be -1<=x<1,
and the gr_multiply_const_ff block has set the default amplitude to 1, so
this block seems useless.
The only way I found to scale the power of signal we transmit is to enhance
the gain of usrp_sink. However, we use RFX900 d'board as it has a bigger
gain range (0~70dB), and RFX900 doesn't provide a adjustment tx gain. In
other words, the tx.set_gain() and tx.get_gain() can't work at all. Did the
RFX900 set the maximum gain value as tx_gain default value, It could also
be 70dB, right?
Is there any other way to scale the transmit signal power with uhd?
best.
Lee
--
View this message in context:
http://gnuradio.4.n7.nabble.com/trouble-with-gr-multiply-const-ff-tp45018p45128.html
Sent from the GnuRadio mailing list archive at Nabble.com.