[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] QAM Modulation-Demodulation in Loopback
From: |
Brian Padalino |
Subject: |
Re: [Discuss-gnuradio] QAM Modulation-Demodulation in Loopback |
Date: |
Wed, 4 Dec 2013 08:25:53 -0500 |
On Wed, Dec 4, 2013 at 5:46 AM, Kartik Seth <address@hidden> wrote:
> I had already done simulation for PSK as well as QAM in GNURadio and
> everything worked fine, even after using Channel Model block in between.
>
> When using with bladeRF in loopback the issues with 8PSK and QAM are coming.
> I can see the constellation in scope sink(if that gives any insight) but
> nothing is demodulated correctly. Moreover, once in a while data is
> demodulated(after many executions of same flowgraph).
>
> So either there are some issues with Demod blocks or with the hardware
> (assuming flowgraph is correct).
>
> Has anyone tried this before and can confirm that this works?
> It would be helpful if someone can try this on their end and provide
> feedback.
If you put your flowgraph online somewhere that I can grab, I'd give it a shot.
Maybe push it up to github and send a link to that?
Given that you've tried it out with even the channel model between the
blocks, it's probably a configuration item or hardware misbehaving.
Brian