Re: [Discuss-gnuradio] Issue with gr-funcubedongleproplus

[Mike Harpe]

This is what I see in /var/log/messages when I plug it in.

Feb 16 10:19:56 debianvm kernel: [  485.160978] usb 2-2.2: new full-speed USB device number 6 using uhci_hcd
Feb 16 10:19:56 debianvm kernel: [  485.432177] usb 2-2.2: New USB device found, idVendor=04d8, idProduct=fb31
Feb 16 10:19:56 debianvm kernel: [  485.432180] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 16 10:19:56 debianvm kernel: [  485.432181] usb 2-2.2: Product: FUNcube Dongle V2.0 
Feb 16 10:19:56 debianvm kernel: [  485.432182] usb 2-2.2: Manufacturer: Hanlincrest Ltd.        
Feb 16 10:19:56 debianvm kernel: [  485.487344] 6:1:1: cannot get freq at ep 0x81
Feb 16 10:19:56 debianvm kernel: [  485.532651] generic-usb 0003:04D8:FB31.0003: hiddev0,hidraw1: USB HID v1.11 Device [Hanlincrest Ltd.          FUNcube Dongle V2.0  ] on usb-0000:02:00.0-2.2/input2
Feb 16 10:19:56 debianvm mtp-probe: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-2/2-2.2"
Feb 16 10:19:56 debianvm mtp-probe: bus: 2, device: 6 was not an MTP device

Thanks for looking at this.

Mike Harpe

On Sun, Feb 16, 2014 at 1:31 AM, Volker Schroer <address@hidden> wrote:

What do you see in your message log, when you connect the dongle to your computer ?

-- Volker


Am 15.02.2014 21:30, schrieb Mike Harpe:

Hello! I've gotten GNU Radio 3.7.2.1 compiled and running. I have a
FunCube Dongle Pro Plus V2 that I received in the last week.

My environment is Debian wheezy running a generic kernel.

I am getting the following when I try to run the narrowband FM example.
It has to do with the control part of the dongle. I tried the udev
change with no success. I am new to working with devices in udev so I'm
sure that's the problem.

Here's what I get...

Showing: "/home/mike/fcd_nfm_rx.grc"

Generating: "/home/mike/fcd_nfm_rx.py"

Executing: "/home/mike/fcd_nfm_rx.py"

Using Volk machine: avx_64_mmx_orc
Funcube Dongle Pro+ found as: plughw:1,0
Traceback (most recent call last):
   File "/home/mike/fcd_nfm_rx.py", line 405, in <module>
     tb = fcd_nfm_rx()
   File "/home/mike/fcd_nfm_rx.py", line 257, in __init__
     self.fcdproplus_fcdproplus_0 = fcdproplus.fcdproplus("",1)
   File
"/usr/local/lib/python2.7/dist-packages/fcdproplus/fcdproplus_swig.py",
line 103, in make
     return _fcdproplus_swig.fcdproplus_make(device_name, unit)
RuntimeError: FunCube Dongle  V2.0 soundcard found but not controlpart.

Any help is appreciated.

Thank you!

Michael Harpe, N4PLE
Sellersburg, IN

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio