[Discuss-gnuradio] GNU Radio support on MicroZed

[Nowlan, Sean]

I'm not the world's foremost expert in OpenEmbedded (read: person with nearly no knowledge of how to use it). I'd like to get GNU Radio working on a MicroZed. Unfortunately that board is not among the boards supported as mentioned here: http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq  Also, I don't necessarily need John Pendlum's changes to add userspace support for interfacing with the FPGA. I just want to get the ARM running GNU Radio.

The meta-xilinx-community repo claims to support a BSP and build for MicroZed: http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx-community/about/  How do I go about merging these two things together? I've taken my best guess as to how to setup a configuration with Poky:

Build Configuration:

BB_VERSION        = "1.23.1"

BUILD_SYS         = "x86_64-linux"

NATIVELSBSTRING   = "Ubuntu-13.10"

TARGET_SYS        = "arm-poky-linux-gnueabi"

MACHINE           = "microzed-zynq7"

DISTRO            = "poky"

DISTRO_VERSION    = "1.6+snapshot-20140822"

TUNE_FEATURES     = " arm armv7a vfp neon zynq"

TARGET_FPU        = "vfp-neon"

meta              

meta-yocto        

meta-yocto-bsp    = "master:34436672f3ef4915e7526770a0fa8dcff328f93d"

meta-xilinx       = "master:83bf54daeaca21879290bf444876f9949b117454"

meta-xilinx-community = "master:a093287b81d446435d44cf238a9240782a80e1b7"

meta-oe           

meta-networking   

meta-filesystems  = "master:8f637f9bbcdda1dc7a1998d243708c727aa6016f"

meta-sdr          = "master:21e2722a5e6671fd98268241f216e087f279566d"

​Am I on the right track here? It's still fetching/building/etc. I'm not too confident it will actually work, since I don't really know what I'm doing.

Thanks,

Sean