[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Extracting and storing certain parameters from co
From: |
madengr |
Subject: |
Re: [Discuss-gnuradio] Extracting and storing certain parameters from continuous IQ data |
Date: |
Wed, 11 Mar 2015 14:39:23 -0700 (MST) |
You can also use probes to bring out the data asynchronously from the flow
which you can then process in Python. For example, you could probe at a 10
Hz rate, then have your Python script log those values to a file, or trigger
some other event. I have an example here where it probes the signal level
every second and logs it with GPS data:
https://github.com/madengr/drive_test
Lou
Ali Riaz wrote
> Hello everyone,
>
> So I was trying to capture continuous IQ data from my USRP N200, and this
> needs to be done for about a week, but because the amount of data is
> ginormous, that's doesn't seem feasible at all. Instead, what I'm now
> thinking of doing is processing the data in gnuradio companion in real
> time
> and just extracting certain parameters from the processed data, for
> instance, I would like to detect if there's a signal present or not, at
> what time was the signal detected, what's the maximum amplitude of the
> signal, how long did the signal last etc, and just store those pieces of
> information in a file.
>
> Are there any pre-existing blocks that I may use for this purpose? If not,
> can someone please guide me as to how to accomplish this task?
>
> This is what my flow graph looks like at the moment:
> http://imgur.com/a/O2gXi
>
> Thank you,
>
> Best,
> Ali
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
--
View this message in context:
http://gnuradio.4.n7.nabble.com/Extracting-and-storing-certain-parameters-from-continuous-IQ-data-tp52645p52647.html
Sent from the GnuRadio mailing list archive at Nabble.com.