RC1, master seems to work.
Ralph.
-----Original Message-----
From: Martin Braun [mailto:address@hidden
Sent: Wednesday, April 15, 2015 15:44
To: Ralph A. Schmid, dk5ras; address@hidden; 'GNU Radio
Discussion List'
Subject: Re: [Discuss-gnuradio] New UHD seems to break a lot...
Thanks, Ralph. Just to clarify: When you say 'New UHD', do you mean
3.8.3-RC1, or latest master?
Martin
On 15.04.2015 08:40, Ralph A. Schmid, dk5ras wrote:
It is a B210, but as a note, due to the up to now missing FPGA images
I used 003.008.003-RC1, not the latest master. Still I had no access
to a spectrum and DVB-T analyzer, so I have no idea what is happening,
I just can confirm that RF is transmitted, and the receiver doesn't
get a picture, while with the snapshot of the same VM before the upgrade
is received without problems.
I will know more in about three hours.
Ralph.
-----Original Message-----
From: Martin Braun [mailto:address@hidden
Sent: Wednesday, April 15, 2015 3:15 PM
To: Ralph A. Schmid, dk5ras; address@hidden; 'GNU Radio
Discussion List'
Subject: Re: [Discuss-gnuradio] New UHD seems to break a lot...
On 15.04.2015 06:20, Ralph A. Schmid, dk5ras wrote:
Hi,
Not only OpenBTS is affected, also gr-dvbt/t2 do not work any more
with latest uhd. A quick check during lunch break showed, the
produced output is not decodable any more. I will take a closer look
this evening at home, where I have more and better equipment.
Ralph,
which device is this on?
Thanks,
Martin