[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Gain and Sample Rate Setting
From: |
Ben Gustin |
Subject: |
[Discuss-gnuradio] Gain and Sample Rate Setting |
Date: |
Sun, 30 Aug 2015 23:05:00 +0200 |
Hello all,
I have XCVR2450 USRP's. I have been trying to send the data between two
USRP's. I have made some changes to the python code in uhd_interface.py
where I have changed the gain to 25 and set the frequency for
transmitter and receiver to 2.435G. I have run uhd_fft program only to
find that my sample rate of 50k is not being supported. I am unable to
know how to set the sample rate and sps for my device. Because of that,
I have been receiving some errors like
ok = False pktno = 88 n_rcvd = 1 n_right = 0
ok = False pktno = 105 n_rcvd = 2 n_right = 0
ok = False pktno = 49227 n_rcvd = 3 n_right = 0
ok = False pktno = 117 n_rcvd = 4 n_right = 0
ok = False pktno = 121 n_rcvd = 5 n_right = 0
ok = False pktno = 122 n_rcvd = 6 n_right = 0
ok = False pktno = 126 n_rcvd = 7 n_right = 0
I also have attached a graph of uhd_fft program. I think I have got a
wave which represents a transmission gain of 25 and received gain of 15
because I have specified it in the uhd_interface.py program. Please
advice as to where I can change these settings so that I might be able
to receive packet in a right order. Thank you
Regards,
Ben
Attachments:
http://www.ruby-forum.com/attachment/11064/Screenshot_from_2015-08-27_15_01_49.png
--
Posted via http://www.ruby-forum.com/.
- [Discuss-gnuradio] Gain and Sample Rate Setting,
Ben Gustin <=
- Re: [Discuss-gnuradio] Gain and Sample Rate Setting, Jeon, 2015/08/30
- Re: [Discuss-gnuradio] Gain and Sample Rate Setting, Ben Gustin, 2015/08/30
- Re: [Discuss-gnuradio] Gain and Sample Rate Setting, Ben Gustin, 2015/08/30
- Re: [Discuss-gnuradio] Gain and Sample Rate Setting, Ben Gustin, 2015/08/31
- Re: [Discuss-gnuradio] Gain and Sample Rate Setting, Ben Gustin, 2015/08/31