Re: [Discuss-gnuradio] baz-utils and python path

[Freedomfighter099 .]

I understand the error message  which is printed in the error

what I don’t understand is what to copy and where to past it?

Within cyberspectrum directory there are a bunch of py executable codes

Scanner.py and spectrum_view and such are in the same directory as the config.model.py which is the code in question, what do I do with this code? Furthermore where do I paste it to.

Sorry I am a newbie to all of this coding stuff, so things are not self-explanatory to me yet

I have a USRP B200 which is a detail which might be relevant.

And again thanks

2016-04-23 20:42 GMT+02:00 Nate Temple <address@hidden>:

Hello,

The solution to resolving your error is printed within the error itself.

"Make sure you have a config.py (e.g. make a copy of config.model.py)"

You need to copy config.model.py to config.py within the cyberspectrum/ folder. scanner.py should then run.

Here is the relevant bit of code - https://github.com/balint256/cyberspectrum/blob/master/scanner.py#L67

Regards,
Nate

> On Apr 23, 2016, at 1:59 AM, Freedomfighter099 . <address@hidden> wrote:
>
> I got everything to work using the export command so thanks for that,
>
> I have unfortunately already run into another issue which I could need some guidance on
>
> I’m running into this error: Could not import configuration: No module named config
>
> Make sure you have a config.py (e.g. make a copy of config.model.py)
>
> Traceback (most recent call last):
>
>   File "./scanner.py", line 74, in <module>
>
>     raise e
>
> ImportError: No module named config
>
> address@hidden:/usr/local/gnuradio/cyberspectrum$
>
> it would seem that the python code in config.model.py is not executable is that right and if so how can I make it executable so that I can get the following scanner.py and spectrum_viewer.py to work
>
> Any advice or guidance would be greatly appreciated
>
> Thanks
>
>
> 2016-04-23 0:31 GMT+02:00 Nate Temple <address@hidden>:
> Hello,
>
> You can add the path to your PYTHONPATH variable by adding this line to the end of your ~/.bashrc file
>
> export PYTHONPATH=$PYTHONPATH:/path/to/baz-utils/lib/python
>
>
> You'll need to update the "/path/to/baz-utils/lib/python" to where you have cloned baz-utils. Also note baz-utils directory structure has changed and the readme is outdated , it should say lib/python instead of src/python. ( The structure was changed with this commit: https://github.com/balint256/baz-utils/commit/66d1382383e48a09b9af65a86f43f2eb813f83a3 )
>
> After you add the export line above to your ~/.bashrc file, you'll need to log out and log back in for it to take effect. You can check it with
>
> echo $PYTHONPATH
>
>
>
>
> - Nate
>
>
> > On Apr 22, 2016, at 1:31 PM, Freedomfighter099 . <address@hidden> wrote:
> >
> > Hello
> >
> > Would someone please explain to me how to add the following to python path: Add src/python to PYTHONPATH
> >
> > I can’t seem to get it to work! instructions would be greatly appreciated
> >
> > cheers
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio