[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] guided tutorials - problem with tutorial 3
From: |
Jacqueline . Walker |
Subject: |
Re: [Discuss-gnuradio] guided tutorials - problem with tutorial 3 |
Date: |
Fri, 13 Jan 2017 11:01:27 +0000 |
Hi Martin,
Sorry, I did forget to put all that in, still learning including how to use a
list for help.
Right - I have it on a VM running Archlinux (4.8.13-1 - I only started a week
ago) and I used pacman to install the package gnuradio 3.7.10.1-3.
At that point after installing the gnuradio package I had to go and fetch extra
packages (gtk2, gtk3, python-lxml and python2-cheetah) to make the grc work. I
am not sure if maybe I should have explicitly installed gnuradio-companion? But
once I'd installed the extra packages it worked fine - until I started the
python programming part.
Thanks,
Jacqueline
-----Original Message-----
From: Discuss-gnuradio [mailto:address@hidden On Behalf Of Martin Braun
Sent: 13 January 2017 01:59
To: address@hidden
Subject: Re: [Discuss-gnuradio] guided tutorials - problem with tutorial 3
Which platform are you running on?
-- M
On 01/12/2017 06:55 AM, Jacqueline.Walker wrote:
> Hi Kartik,
>
>
>
> Well, no I would think there ought not be an error in the tutorial,
> but the fact remains that if I run the 'if_else_mod.py' from the
> ~/solutions/gr-tutorial/examples/tutorial3/python/ folder I get the
> exact same runtime errors, so it might be something in the build. I
> attach my own if_else_mod.py file which has been produced by my
> firstly generating if_else.py from the flowgraph which I have built as
> instructed in the tutorial and then doing exactly as instructed in the
> tutorial the modifications to the def _variable_function_probe_0_probe():.
>
> I also attach the 'solutions' version of the if_else_mod.py (called
> if_else_mod_orig.py) and a file which summarises investigations made
> so far and the results of Kompare to discover the differences in the code.
> Clearly the grc generates code which differs somewhat from the samples
> in the ~/python directory (which are from an older version, clearly).
>
> I don't know if it is anything to do with the 'tb = if_else' line - I
> am about to test that out.
>
>
>
> Thanks
>
> Regards
>
> Jacqueline
>
>
>
>
>
> *From:*Kartik Patel [mailto:address@hidden
> *Sent:* 11 January 2017 21:32
> *To:* Jacqueline.Walker; address@hidden
> *Subject:* Re: [Discuss-gnuradio] guided tutorials - problem with
> tutorial 3
>
>
>
> Hi Jacqueline,
>
> I don't think there's error in the tutorial. Please send your GRC or
> Python file.
>
> Thank you.
>
> Regards,
> Kartik Patel
>
>
>
> On 10:54PM, Wed, Jan 11, 2017 Jacqueline.Walker
> <address@hidden <mailto:address@hidden>> wrote:
>
> Hello,
>
>
>
> Trying the tutorial three - python in gnu radio and the 'if_else'
> mod file. I get this run-time error even with the tutorial/solutions
> file so it might be a build thing.
>
>
>
> Basically when it runs with the added if val == 1: block it raises
> an
>
> Attribute error top_block_sptr has no attribute named analog_sig
> _/x1/_source block - (sorry not correctly copied but you get the
> idea hopefully) - in other words it does not recognise the analog
> signal source that you have and that you are trying to modify the
> freq and/or amplitude of under control of the simple if/else using
> the probe_signal variable as outlined in the tutorial.
>
> Is there something missing in the build or is it some error in the
> file/instructions in the tutorial?
>
>
>
> Thanks
>
> Jacqueline
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden <mailto:address@hidden>
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
> --
>
> Regards,
> Kartik Patel
> B.Tech. Final Year
> Electronics and Communication Engineering Indian Institute of
> Technology, Roorkee
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
- [Discuss-gnuradio] guided tutorials - problem with tutorial 3, Jacqueline . Walker, 2017/01/11
- Re: [Discuss-gnuradio] guided tutorials - problem with tutorial 3, Kartik Patel, 2017/01/11
- Re: [Discuss-gnuradio] guided tutorials - problem with tutorial 3, Jacqueline . Walker, 2017/01/12
- Re: [Discuss-gnuradio] guided tutorials - problem with tutorial 3, Kartik Patel, 2017/01/12
- Re: [Discuss-gnuradio] guided tutorials - problem with tutorial 3, Martin Braun, 2017/01/12
- Re: [Discuss-gnuradio] guided tutorials - problem with tutorial 3,
Jacqueline . Walker <=
- Re: [Discuss-gnuradio] guided tutorials - problem with tutorial 3, sreeraj r, 2017/01/13
- Re: [Discuss-gnuradio] guided tutorials - problem with tutorial 3, Jacqueline . Walker, 2017/01/13
- Re: [Discuss-gnuradio] guided tutorials - problem with tutorial 3, sreeraj r, 2017/01/13
- [Discuss-gnuradio] GNUradio not working with SDRplay in Windows10, Arie Kleingeld PA3A, 2017/01/13
- Re: [Discuss-gnuradio] GNUradio not working with SDRplay in Windows10, Martin Braun, 2017/01/13
- Re: [Discuss-gnuradio] GNUradio not working with SDRplay in Windows10, Arie Kleingeld PA3A, 2017/01/13
- Re: [Discuss-gnuradio] GNUradio not working with SDRplay in Windows10, Marcus Müller, 2017/01/13
- Re: [Discuss-gnuradio] GNUradio not working with SDRplay in Windows10, Arie Kleingeld PA3A, 2017/01/13
- Re: [Discuss-gnuradio] GNUradio not working with SDRplay in Windows10, Marcus Müller, 2017/01/13
- Re: [Discuss-gnuradio] GNUradio not working with SDRplay in Windows10, Sylvain Munaut, 2017/01/14