Re: [Discuss-gnuradio] Last step in GNURadio - SDRPlay install

[Cinaed Simson]

On 01/26/2017 08:12 AM, Arie Kleingeld PA3A wrote:
> Hello guys,
> 
> After trying to get SDRPlay connected to GNURadio in Windows (up till
> now unsuccessful and request sent to SDRPlay) I've been busy getting it
> to work in Ubuntu.
> 
> Well, I think I'm nearly there after trying many suggestions found on
> several sites :-)
> 
> Below is the result of starting GRC with a simple osmocom-source and
> WX-FFT GUI, the 'hello world' of gnuradio, so I'm told. In this case,
> the hardware device is an SDRPlay.
> 
> The FFT screen comes on screen, but is not displaying any FM-band
> signal, and no noise floor is visible.
> What's missing??

Your grc file - the file which was executed by gnuradio and generated
the selective outputs below.

-- Cinaed

> 
> Kind regards,
> Arie PA3A
> 
> ---------
> /Generating: '/home/aw/Bureaublad/top_block.py'//
> //
> //Executing: /usr/bin/python -u /home/aw/Bureaublad/top_block.py//
> //
> //Using Volk machine: sse4_1_64_orc//
> //gr-osmosdr v0.1.4-75-gae686c46 (0.1.5git) gnuradio 3.7.9//
> //built-in source types: file fcd rtl_tcp sdrplay rfspace redpitaya //
> //get_devices started//
> //Device count: 1//
> //sdrplay=0,label='SDRplay RSP'//
> //get_devices end//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //set_sample_rate start//
> //rate = 1e+06//
> //diff = -1.048e+06//
> //set_sample_rate end//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //set_center_freq start//
> //freq = 9.34e+07//
> //diff = -1.066e+08//
> //set_center_freq end//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //set_gain started//
> //gain = 10//
> //set_gain end//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //get_num_channels: 1//
> //reinit_device started//
> //after mutex.lock//
> //mir_sdr_Init started//
> //reinit_device end/
> 
> ----------------------------
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>