Re: [Discuss-gnuradio] Last step in GNURadio - SDRPlay install

[Arie Kleingeld PA3A]

You are correct Cinaed and I understand what you mean.

Problem is that sdrplay does not deliver the data to the FFT. I enclosed 
the output from GRC to provide more info.
Still looking for a solution.

73 PA3A


Op 27-1-2017 om 0:21 schreef Cinaed Simson:

> Your grc file - the file which was executed by gnuradio and generated
> the selective outputs below.
>
> -- Cinaed
>
> > Kind regards,
> > Arie PA3A
> >
> > ---------
> > /Generating: '/home/aw/Bureaublad/top_block.py'//
> > //
> > //Executing: /usr/bin/python -u /home/aw/Bureaublad/top_block.py//
> > //
> > //Using Volk machine: sse4_1_64_orc//
> > //gr-osmosdr v0.1.4-75-gae686c46 (0.1.5git) gnuradio 3.7.9//
> > //built-in source types: file fcd rtl_tcp sdrplay rfspace redpitaya //
> > //get_devices started//
> > //Device count: 1//
> > //sdrplay=0,label='SDRplay RSP'//
> > //get_devices end//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //set_sample_rate start//
> > //rate = 1e+06//
> > //diff = -1.048e+06//
> > //set_sample_rate end//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //set_center_freq start//
> > //freq = 9.34e+07//
> > //diff = -1.066e+08//
> > //set_center_freq end//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //set_gain started//
> > //gain = 10//
> > //set_gain end//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //get_num_channels: 1//
> > //reinit_device started//
> > //after mutex.lock//
> > //mir_sdr_Init started//
> > //reinit_device end/
> >
> > ----------------------------