|
From: | Trejo Treviño , Fernando Alberto |
Subject: | Re: [Discuss-gnuradio] Measure and record the phase at the receiver |
Date: | Wed, 22 Mar 2017 17:51:07 +0000 |
Hi Marcus!
I am implementing a transmitter and a receiver model using two USRP N210s. Both are using GFSK modulation, and the data is transmitted at 2.4 GHz. I would like to add a phase shift at the transmitter side via the use of a multiplier block with an exponential. Then, at the receiver I would like to receive this transmitted signal and check if the phase matches the one that was transmitted. This is why I need a measuring method.
Regards,
Fernando
From: Discuss-gnuradio <discuss-gnuradio-bounces+address@hidden> on behalf of Marcus Müller <address@hidden>
Sent: Wednesday, March 22, 2017 6:30:44 PM To: address@hidden Subject: Re: [Discuss-gnuradio] Measure and record the phase at the receiver Hi Fernando,
you'll need to be a little more specific what you mean with "a received signal" and its phase – a PLL does keep track of the phase, but its job is, by definition, to "correct" the output so that it follows a specific phase behaviour, so a PLL is certainly not what you're looking for alone.
can you tell us more about your signal and what you want to do, in the bigger picture?
Marcus On 03/22/2017 05:58 PM, Trejo Treviño, Fernando Alberto wrote:
|
[Prev in Thread] | Current Thread | [Next in Thread] |