|
From: | Dan CaJacob |
Subject: | Re: [Discuss-gnuradio] Synchronisation |
Date: | Mon, 11 Sep 2017 00:58:12 +0000 |
I could be wrong, but I thought the SBX was one of the few daughter cards that starts with s known phase offset?
Dear All,
I have a couple of USRPs connected, through a strong
attenuator to a signal generator (NWT4001). While the units have a MIMO
option, I don't have that cable. (Option A) When I run the GRC as
attached, I see too good a result to the extent that the differential
Phi seems to range over +/- 5 degrees.
What I had hoped to prove to myself that two N200 with SBX
would have a varying offset without MIMO cable, then I would connect the
MIMO cable and move the USRPs into a multi-unit and enable GPSD O/B on
the unit which has the feature and MIMO for one without (Option B) and
that the phase differential would improve noticeably and be a variable
constant, but it didn't.
If it had, but there still was a fixed phase offset which
varied each time it was setup (which is what I would expect under B)
then I would hand-code the SBX stream initialisation code to remove the
offset.
Does my FG not measure what I claim to be wishing to
measure?
If it does measure it correctly, why do my expectations
of options A and B leading to a different (though improved) situation
not eventuate?
Kind Regards,
John
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |