[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Analog Bandwidth of UHD Block
From: |
CEL |
Subject: |
Re: [Discuss-gnuradio] Analog Bandwidth of UHD Block |
Date: |
Fri, 9 Feb 2018 21:26:10 +0000 |
To be a bit more explicit: like the product page says, you **cannot**
use the UBX-160 in an N210. You need an X3x0 if you want to use that!
If you're however interested in smaller bandwidths that the N210 can
sample alias-free, yes, the UBX-40, or the other *BX daughterboards
would be an appropriate choice!
On Fri, 2018-02-09 at 15:48 -0500, Marcus D. Leech wrote:
> On 02/09/2018 03:44 PM, Tellrell White wrote:
> > Hello
> > I'm currently using the N210 with the UBX-160 daughterboard and the
> > link below says the analog bandwidth is 160 MHZ. So, I'm assuming
> > this BW isn't changeable so what do I put for the channel BW within
> > the UHD block within GNU Radio?
> >
> > https://kb.ettus.com/About_USRP_Bandwidths_and_Sampling_Rates
> >
> > Tellrell White
> >
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> The analog bandwidth on that card is fixed, so the bandwidth setting
> will have no effect. The UBX-40 would have been a better choice,
> given the
> 100Msps ADC rate on the N210.
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio