RE: [Dvdrtools-users] Pioneer A04 on RH73

[TASIS IT Office]

Hello,

I am glad to know that the lead-in is probably not the problem.  I
assumed that the leadin error was a problem, because I tried a DVD-RW
earlier today and it didn't work (I will try again with a DVD-R).  
Now, I can't even blank the dvd -- I have tried
        blank=all -force
maybe I need to upgrade the firmware (as the man page suggests) -- any
other ideas.

PS --- I know the speed is wrong, but at lease cdrecord will
automatically adjust to the proper speed.  (I couldn't tell what the
proper speed was.  As far as I could tell, but now I will use the dvd
speed).

Thanks for your response.

Bill

On Wed, 2002-08-28 at 01:32, Klotz, Leigh wrote:
> Speed=32 is a bit optimistic, btw.
> Is the error you mean the ATIP start of lead in?  I get that too but it
> doesn't seem to affect the disks, at least not that I can tell.
> 
> -----Original Message-----
> From: TASIS IT Office [mailto:address@hidden 
> Sent: Tuesday, August 27, 2002 4:07 PM
> To: address@hidden
> Subject: [Dvdrtools-users] Pioneer A04 on RH73
> 
> 
> Hello,
> 
> I have a Pioneer A04 on a RH73 machine.  I am using the Pioneer Media. 
> However, it seems to have a problem with the media when I use dvdrecord.
> 
> # dvdrecord -v -eject -dummy -dao dev=0,0,0 speed=32 image.iso 
> dvdrtools v0.1.3
> Portions (c) 2002 Red Hat, Inc.
> Based on:
> Cdrecord 1.11a15 (i386-redhat-linux-gnu) Copyright (C) 1995-2001 Jörg
> Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 2
> Capabilities   : 
> Vendor_info    : 'PIONEER '
> Identifikation : 'DVD-RW  DVR-104 '
> Revision       : '1.20'
> Device seems to be: Generic mmc2 DVD.
> Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> Driver flags   : SWABAUDIO BURNFREE 
> Supported modes: PACKET SAO
> Drive buf size : 1638400 = 1600 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  3958 MB        
> Total size:     4545 MB (450:19.94) = 2026496 sectors
> Lout start:     4545 MB (450:21/71) = 2026496 sectors
> Current Secsize: 2048
>   ATIP start of lead in:  -150 (00:00/00)
> Disk type:    unknown
> Manuf. index: -1
> Manufacturer: unknown (not in table)
> Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 272000
> Starting to write CD/DVD at speed 2 in dummy mode for single session.
> Last chance to quit, starting dummy write in 0 seconds. Operation
> starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> trackno=0
> BURN-Free is ON.
> Sending CUE sheet...
> dvdrecord: WARNING: Drive returns wrong startsec (0) using -150
> Starting new track at sector: 0
> Track 01: 3958 of 3958 MB written (fifo 100%).
> Track 01: Total bytes read/written: 4150263808/4150263808 (2026496
> sectors).
> Writing  time: 2176.914s
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time:    1.590s
> dvdrecord: fifo had 65371 puts and 65371 gets.
> dvdrecord: fifo was 0 times empty and 53260 times full, min fill was
> 95%.
> 
> 
> 
> When I uase cdrecord-dvdpro under exactly the same conditions all works
> well:
> 
> address@hidden bin]# cdrecord-pro -v -eject -dummy dev=0,0,0 speed=32
> /home/downloads/Linux/RH73/RH73-dvd.iso 
> Cdrecord-ProDVD-Clone 1.11a21 (i586-pc-linux-gnu) Copyright (C)
> 1995-2002 Jörg Schilling
> Unlocked features: 
> Limited  features: 
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.6'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 2
> Capabilities   : 
> Vendor_info    : 'PIONEER '
> Identifikation : 'DVD-RW  DVR-104 '
> Revision       : '1.20'
> Device seems to be: Generic mmc2 DVD.
> cdrecord-pro: This version of cdrecord limits DVD-R/DVD-RW support to
> -dummy or 1 GB real.
> cdrecord-pro: If you need full DVD-R/DVD-RW support, ask the Author for
> cdrecord-ProDVD.
> Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
> Driver flags   : SWABAUDIO 
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  3958 MB        
> Total size:     4545 MB (450:19.97) = 2026498 sectors
> Lout start:     4545 MB (450:21/73) = 2026498 sectors
> Current Secsize: 2048
> Total power on  hours: 14
> Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 271998
> Starting to write CD/DVD at speed 2 in dummy mode for single session.
> Last chance to quit, starting dummy write in 0 seconds. Operation
> starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is ON.
> Starting new track at sector: 0
> Track 01: 3958 of 3958 MB written (fifo 100%) 15.8x.
> Track 01: Total bytes read/written: 4150263808/4150263808 (2026496
> sectors).
> Writing  time: 2096.382s
> Fixating...
> Fixating time:    1.353s
> cdrecord-pro: fifo had 65371 puts and 65371 gets.
> cdrecord-pro: fifo was 1 times empty and 51412 times full, min fill was
> 0%.
> 
> Can someone offer advice?
> 
> Thanks,
> 
> Bill Tihen
> -- 
> TASIS IT (Tech Department)
> address@hidden
> http://www.tasis.ch/
> 
> 
> 
> _______________________________________________
> Dvdrtools-users mailing list
> address@hidden
> http://mail.freesoftware.fsf.org/mailman/listinfo/dvdrtools-users
-- 
TASIS IT (Tech Department)
address@hidden
http://www.tasis.ch/