[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Dvdrtools-users] Sony DRU-500A and Pioneer DVD-116 reader: correction
From: |
Jay Berkenbilt |
Subject: |
[Dvdrtools-users] Sony DRU-500A and Pioneer DVD-116 reader: correction |
Date: |
Sat, 25 Jan 2003 11:52:28 -0500 |
This is somewhat off topic, but I don't like to leave incorrect
information out there so.....
I wanted to post a correction to some remarks I had made earlier about
my experiences with the reading DVD-R discs written on the Sony
DRU-500A with my Pioneer DVD-116 DVD-ROM drive. I had at one point
stated that I had some read errors on these discs that I had
attributed to writing discs at higher than their rated speed. In
fact, it was all in my head. It seems that reading from /dev/cdrom
(as in dd if=/dev/cdrom) always returns 0 (EOF) immediately with the
Pioneer DVD-116 and a DVD-R (but not a DVD+R) disc. However, this is
a driver or software problem as it goes away if I use the ide-scsi
driver instead of the default CD driver.
Also, I've done some experimentation with writing DVD-R discs using
the latest dvd+rw-tools and am pleased to report so far that I have
had no compatibility problems. I have also verified that the DVD-R
reading problems I have with my Pioneer reader (which has fewer
problems with the latest firmware but still has some problems) happen
with DVD-R seemingly regardless of where it is written.
--
Jay Berkenbilt <address@hidden>
http://www.ql.org/q/
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Dvdrtools-users] Sony DRU-500A and Pioneer DVD-116 reader: correction,
Jay Berkenbilt <=