[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] ipmi-sensors with Intel SE7210
From: |
Al Chu |
Subject: |
Re: [Freeipmi-users] ipmi-sensors with Intel SE7210 |
Date: |
Mon, 24 Jul 2006 15:23:34 -0700 |
Hey Alexey,
I think doing --prefix=/usr should be enough. I don't think an rpm is
necessary.
> Ok, I will reconfigure and recompile ipmi tomorrow with debug.
Cool, that should help. Thanks.
Al
>
>
On Tue, 2006-07-25 at 02:16 +0400, Alexey V Paramonov wrote:
> Al Chu wrote:
>
> >Hi Alexey,
> >
> >Did you just do a 'make install' or did you actually build an rpm from
> >the CVS stuff?
> >
> >
> >
> I used 'make install', and used /usr as a prefix.
> Should I try to build rpm package?
>
> >Unfortunately, some of the other developers haven't converted ipmi-
> >sensors into C yet, so the scheme files have to be installed in the
> >right locations for everything to work.
> >
> >For me, I usually have to do the following to make it work:
> >
> >./configure --prefix=/usr
> >
> >and add --libdir=/usr/lib64 for x86_64 machines.
> >
> >Either way, could you also add --enable-debug and --enable-trace to get
> >us more debug info?
> >
> >
> Ok, I will reconfigure and recompile ipmi tomorrow with debug.
>
> >Al
> >
> >On Tue, 2006-07-25 at 01:37 +0400, Alexey V Paramonov wrote:
> >
> >
> >>Hi all.
> >>Just installed freeipmi from CVS, bmc-info seems to work fine (see
> >>output below), but ipmi-sensors says "Cat ate the fish", please help.
> >>====================================================================
> >>localhost ~ # ipmi-sensors
> >>
> >> >>--:> >>--:> >>--:> >>--:>
> >>~ ~ Cat ate the fish!! ~ ~
> >> >>--:> >>--:> >>--:> >>--:>
> >>Fish Exception Handler:
> >>tag : unbound-variable
> >>throw args : (#f Unbound variable: ~S (sensors-argp) #f)
> >>data : [/usr/sbin/ipmi-sensors]
> >>No backtrace available.
> >>====================================================================
> >>
> >>bmc-info output:
> >>
> >>localhost ~ # bmc-info
> >>Device ID: 20
> >>Device Revision: 1
> >> [SDR Support]
> >>Firmware Revision: 2.64
> >> [Device Available (normal operation)]
> >>IPMI Version: 1.5
> >>Additional Device Support:
> >> [Sensor Device]
> >> [SDR Repository Device]
> >> [SEL Device]
> >> [FRU Inventory Device]
> >> [IPMB Event Receiver]
> >> [Chassis Device]
> >>Manufacturer ID: 322h
> >>Product ID: 4311h
> >>Aux Firmware Revision Info: 0h
> >>Channel Information:
> >> Channel No: 1
> >> Medium Type: 802.3 LAN
> >> Protocol Type: IPMB-1.0
> >> Channel No: 2
> >> Medium Type: System Interface (KCS, SMIC, or BT)
> >> Protocol Type: IPMB-1.0
> >>localhost ~ #
> >>
> >>
> >>_______________________________________________
> >>Freeipmi-users mailing list
> >>address@hidden
> >>http://lists.gnu.org/mailman/listinfo/freeipmi-users
> >>
> >>
>
--
Albert Chu
address@hidden
925-422-5311
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory
Re: [Freeipmi-users] ipmi-sensors with Intel SE7210, Anand Babu, 2006/07/24
- Re: [Freeipmi-users] ipmi-sensors with Intel SE7210, Alexey V Paramonov, 2006/07/26
- Re: [Freeipmi-users] ipmi-sensors with Intel SE7210, Al Chu, 2006/07/26
- Re: [Freeipmi-users] ipmi-sensors with Intel SE7210, Bala.A, 2006/07/26
- Re: [Freeipmi-users] ipmi-sensors with Intel SE7210, Alexey V Paramonov, 2006/07/26
- Re: [Freeipmi-users] ipmi-sensors with Intel SE7210, Bala.A, 2006/07/26
- Re: [Freeipmi-users] ipmi-sensors with Intel SE7210, Alexey V Paramonov, 2006/07/27
- Re: [Freeipmi-users] ipmi-sensors with Intel SE7210, Bala.A, 2006/07/27